| 基于SolidWorks的无杆飞机牵引车驱动桥结构设计仿真分析 |
| |
| 引用本文： | 毛小馨,刘贵明.基于SolidWorks的无杆飞机牵引车驱动桥结构设计仿真分析[J].机械设计,2010,27(2). |
| |
| 作者姓名： | 毛小馨 刘贵明 |
| |
| 作者单位： | 1. 天津赛象科技股份有限公司,天津,300384
2. 中国民航大学,自动化学院,天津,300300 |
| |
| 摘 要： | 目前飞机牵引车是机场主要地面设备之一,其可靠性要求比较高。由于无杆牵引车的工作方式是抱住飞机的前起落架,承受飞机的前轮负载,因此包括驱动桥在内的结构件受到了较大的载荷。文中利用SolidWorks软件建立驱动桥的模型,采用SolidWorks自带的插件CosmosWorks对驱动桥进行受力和疲劳分析,得到其最大变形和最大应力。据此可对驱动桥进行强度校核、结构改进及优化设计。
|
| 关 键 词： | 牵引车 驱动桥 SolidWorks CosmosWorks |
Structural design and simulative analysis on drive axle of rod-less airplane tractor based on SolidWorks |
| |
| MAO Xiao-xin,LIU Gui-ming.Structural design and simulative analysis on drive axle of rod-less airplane tractor based on SolidWorks[J].Journal of Machine Design,2010,27(2). |
| |
| Authors: | MAO Xiao-xin LIU Gui-ming |
| |
| Affiliation: | 1. Tianjin Saixiang Science and Technology Co./a>;Ltd/a>;Tianjin 300384/a>;China/a>;2.China Civil Aviation University/a>;Tianjin 300300/a>;China |
| |
| Abstract: | At present the airplane tractor is one of the main devices of the airport ground equipments,and its reliability requirements is rather high.On account of the working manner of rod-less tractor is to clasping the airplane front landing gear and enduring the load of airplane front wheel,therefore the structural members that including the drive axle internally would receive rather big loading.Utilizing solidworks software to build the drive axle model,adopting the SolidWorks self-bringing plug-in component cos... |
| |
| Keywords: | tractor drive axle solidworks cosmosworks |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
