| 20CrMnTi精炼钢包喂钛线合金化试验研究 |
| |
| 引用本文： | 于广石,陈涛.20CrMnTi精炼钢包喂钛线合金化试验研究[J].天津冶金,2004(2):3-6. |
| |
| 作者姓名： | 于广石 陈涛 |
| |
| 作者单位： | 首钢技术研究院钢研所,100041 |
| |
| 摘 要： | 综述了20CrMnTi钢Ti含量控制和钢包喂Ti线技术，分析了钛在钢中的作用机理、钢包喂钛线的影响因素，设计出首钢精炼钢包喂Ti线合金化工艺，经工业试验证明：该工艺生产的20CrMnTi钢各项力学性能满足国标要求，提高收得率10％，降低了生产成本，取得了良好效果。
|
| 关 键 词： | 20CrMnTi 精炼 钢包 钛线 合金化 试验研究 喂线 齿轮钢 |
| 修稿时间： | 2003年11月18 |
Study on the Ti wire-feeding Alloying Process in 20CrMnTi Refining Ladle Production |
| |
| Yu Guangshi Chen Tao.Study on the Ti wire-feeding Alloying Process in 20CrMnTi Refining Ladle Production[J].Tianjin Metallurgy,2004(2):3-6. |
| |
| Authors: | Yu Guangshi Chen Tao |
| |
| Affiliation: | Yu Guangshi Chen Tao |
| |
| Abstract: | The development of wire-feeding technology and the controlling technology of Ti content in 20CrMnTi steel is outlined. The mechanism of Ti in steel and factors of Ti wire-feeding are analyzed.The Ti wire-feeding alloying process of refining ladle in Shougang Group is designed. The experimental result shows the mechnical properties of 20CrMnTi steel can meet the demands of national standard, the xenolith rate of Ti rises by 10% and the production cost is reduced. |
| |
| Keywords: | ladle 20CrMnTi steel Ti wire alloying content test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
