Properties and characterization of alumina platelet reinforced geopolymer composites

Geopolymers are porous, amorphous, alkali-aluminosilicate hydrate materials formed at room temperature via a solution process. Geopolymer based on metakaolin had a relatively homogeneous microstructure that offered consistent behavior but suffered from dehydration cracking and large densification shrinkages when heated. It was found that by reinforcing a metakaolin geopolymer of composition (K₂O·Al₂O₃·4SiO₂·11H₂O) with 50 µm diameter alumina platelets, dehydration cracking could be prevented, and shrinkage could be reduced by an order of magnitude. Samples were reinforced with 30, 50, and 70 wt% of alumina platelets. Although the properties of the 30 and 50 wt% conditions were better than those of unreinforced geopolymer, those samples still showed warping, cracking, and strength losses on heating. The 70 wt% samples did not warp or crack when heated to temperatures of up to 1500°C. The room-temperature 4-point flexural strength of these samples remained at around 20 MPa regardless of heat treatments. The in situ measured flexural strength increased to almost 40 MPa at 600°C, and remained higher than 20 MPa until 1200°C. Samples subjected to propane-torch thermal shock heating and subsequent quenching did not crack or fragment. Dilatometry, X-ray diffraction, and scanning electron microscopy were used for additional characterization. Given these properties, this material showed promise as a castable refractory.