| 淬硬钢Cr12高速铣削力实验研究 |
| |
| 引用本文： | 陆洁,胡忠举,宋一平,曾湘黔.淬硬钢Cr12高速铣削力实验研究[J].机械设计与制造,2010(2). |
| |
| 作者姓名： | 陆洁 胡忠举 宋一平 曾湘黔 |
| |
| 作者单位： | 湖南科技大学机电工程学院,湘潭,411201 |
| |
| 基金项目： | 湖南省自然科学基金项目(05JJ30080) |
| |
| 摘 要： | 对淬硬钢Cr12进行了高速铣削实验研究,研究了铣削速度、背吃刀量、进给速度对铣削力的影响。研究表明:铣削力随着铣削速度的增加而减小,当铣削速度增加到一定的值后其下降趋势变得平缓;铣削力随背吃刀量的增大而增大,且变化显著;铣削力随进给速度的增加而增加,但增加不大。
|
| 关 键 词： | 高速铣削 淬硬钢 铣削力 切削用量 |
Experimental study on high speed milling force of quench steel cr12 |
| |
| LU Jie,HU Zhong-ju,SONG Yi-ping,ZENG Xiang-qian.Experimental study on high speed milling force of quench steel cr12[J].Machinery Design & Manufacture,2010(2). |
| |
| Authors: | LU Jie HU Zhong-ju SONG Yi-ping ZENG Xiang-qian |
| |
| Affiliation: | School of Electro-mechanical Engineering/a>;Hunan University of Science and Technology/a>;Xiangtan 411201/a>;China |
| |
| Abstract: | High speed milling of quench steel Cr12 is researched. The effect of milling speed,milling depth and feed speed on milling force is focused on. The result of researching shows:the milling force grows as the milling speed increases,but the milling force grows more slowly when the milling speed increases to a determinate number;the milling force grows observably as milling depth increases;the milling force grows as the feed speed increases,but its influence is less. |
| |
| Keywords: | High speed milling Hardened steel Cutting force Cutting parameters |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
