| 热轧切头飞剪异常剪切的原因分析及治理 |
| |
| 引用本文： | 陈刚,万险峰,刘洋,夏江涛,李华. 热轧切头飞剪异常剪切的原因分析及治理[J]. 轧钢, 2014, 31(4): 83-85. DOI: 10.13228/j.boyuan.issn1003-9996.20130214 |
| |
| 作者姓名： | 陈刚 万险峰 刘洋 夏江涛 李华 |
| |
| 作者单位： | 武钢研究院，湖北武汉430080 |
| |
| 摘 要： | 通过对某热轧生产线切头剪异常剪切的原因分析，得出其主要是由现场测量信号异常引起的，通过采用不同的、更稳定的信号及时替代现有信号，降低了因信号异常导致的异常剪切，有效控制了故障时间，提高了成材率和产量。
|
| 关 键 词： | 飞剪控制 异常剪切 最优信号切换 |
| 收稿时间： | 2013-09-09 |
Cause analysis and countermeasures of abnormal shearing in hot rolling line |
| |
| CHEN Gang,WAN Xian-feng,LIU Yang,XIA Jiang-tao,LI Hua. Cause analysis and countermeasures of abnormal shearing in hot rolling line[J]. Steel Rolling, 2014, 31(4): 83-85. DOI: 10.13228/j.boyuan.issn1003-9996.20130214 |
| |
| Authors: | CHEN Gang WAN Xian-feng LIU Yang XIA Jiang-tao LI Hua |
| |
| Affiliation: | Research and Development Center of WISCO, Wuhan 430080, China |
| |
| Abstract: | The causes of abnormal shearing in hot roiling line were analysed. The main reason was the measuring signal abnormal. Some countermeasures of shearing signal optimization were adopted, and good effect was obtained. |
| |
| Keywords: | flying shear control abnormal shearing signal |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
