| 旋流型立筒预热器内物料浓度分布的研究 |
| |
| 引用本文： | 姜洪舟,李福洲. 旋流型立筒预热器内物料浓度分布的研究[J]. 武汉理工大学学报, 1995, 0(1) |
| |
| 作者姓名： | 姜洪舟 李福洲 |
| |
| 作者单位： | 武汉建材设计研究院，武汉工业大学材料工程系 |
| |
| 摘 要： | 旋流型立筒预热器是我国新引进的一种立筒预热器。本文着重研究了该预热器内的物料浓度分布，通过对其冷态模型的实地测量和分析，获得了其内的物料浓度分布规律，并据此研究结果进一步提出了改进该预热器的建议。
|
| 关 键 词： | 立筒预热器；旋流型；物料浓度分布 |
Study on the Solid Material Distribution in a Swirl Shaft Preheater for Cement Rotary Kiln |
| |
| Jiang Hongzhou, Li Fuzhou. Study on the Solid Material Distribution in a Swirl Shaft Preheater for Cement Rotary Kiln[J]. Journal of Wuhan University of Technology, 1995, 0(1) |
| |
| Authors: | Jiang Hongzhou Li Fuzhou |
| |
| Abstract: | The swirl shaft preheates are recently used in a few Chinese cement plants. In this paper,the solid material distribution in the preheater are studied with a cold-state model. With the method of practical measurements and analyses on the model,the result of the solid material distribution in it has been obtained.Accordingly,in order to improve the heat efficiency of the preheater,a suggestion for modifying might be useful |
| |
| Keywords: | shaft preheater swirl solid material distriution |
| 本文献已被 CNKI 等数据库收录！ |
|
