| 电子血压计上壳注塑成型方案的计算机辅助分析 |
| |
| 引用本文： | 张宇,邵魁龙,孙倩,祝铁丽. 电子血压计上壳注塑成型方案的计算机辅助分析[J]. 塑料工业, 2010, 38(1) |
| |
| 作者姓名： | 张宇 邵魁龙 孙倩 祝铁丽 |
| |
| 作者单位： | 1. 大连华录模塑产业有限公司,辽宁,大连,116023
2. 大连理工大学模具研究所,辽宁,大连,116023 |
| |
| 摘 要： | 利用Moldflow Plastics Insight软件对电子血压计上壳塑件的不同注塑成型方案进行了分析比较,根据计算机辅助分析结果对浇注系统的设计方案进行了改进。实际注塑成型效果表明,改进后的浇注系统对注塑成型充填过程的平衡起到了明显的改善作用。
|
| 关 键 词： | 注塑成型 计算机辅助分析 浇注系统 |
Computer-aided Analysis of Injection Molding for the Upside Shell of the Electronic Blood Pressure Monitor |
| |
| ZHANG Yu,SHAO Kui-long,SUN Qian,ZHU Tie-li. Computer-aided Analysis of Injection Molding for the Upside Shell of the Electronic Blood Pressure Monitor[J]. China Plastics Industry, 2010, 38(1) |
| |
| Authors: | ZHANG Yu SHAO Kui-long SUN Qian ZHU Tie-li |
| |
| Affiliation: | 1.Dalian Hualu Molding Co.;Ltd.;Dalian 116023;China;2.Institute of Mold & Die;Dalian University of Technology;China |
| |
| Abstract: | Different injection molding schemes for the upside shell of the electronic blood pressure monitor were analyzed and compared by use of Moldflow Plastics Insight software.According to the computer aided analysis,the design method of the runner system was improved.Factual injection molding result showed the developed runner system had obvious effect on improving flow balance of the plastic melt into the cavity. |
| |
| Keywords: | Injection Molding Computer-aided Analysis Runner System |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
