| 基于多因素的混炼胶质量预测模型 |
| |
| 引用本文： | 李俊,马铁军,陈国华,张海.基于多因素的混炼胶质量预测模型[J].橡胶工业,2006,53(10):614-617. |
| |
| 作者姓名： | 李俊 马铁军 陈国华 张海 |
| |
| 作者单位： | 1. 华南理工大学,工业装备与控制学院,广东,广州,510640;四川理工学院,生物工程系,四川,自贡,643000
2. 华南理工大学,工业装备与控制学院,广东,广州,510640 |
| |
| 摘 要： | 根据密炼机胶料混炼流变理论和瞬时功率控制法等理论,基于填充因数、转子功率、转子转速、排胶温度和压砣压力5个因素建立混炼胶粘度预测模型.检验结果表明,门尼粘度预测值与实际值很接近,两者差的平均值为0.827,预测效果良好。
|
| 关 键 词： | 小型密炼机 混炼胶 多因素预测模型 门尼粘度 |
| 文章编号： | 1000-890X(2006)10-0614-04 |
| 收稿时间： | 04 25 2006 12:00AM |
| 修稿时间： | 2006年4月25日 |
Model for predicting mix quality based on multi-factors |
| |
| LI Jun,MA Tie-jun,CHEN Guo-hua and ZHANG Hai.Model for predicting mix quality based on multi-factors[J].China Rubber Industry,2006,53(10):614-617. |
| |
| Authors: | LI Jun MA Tie-jun CHEN Guo-hua and ZHANG Hai |
| |
| Affiliation: | 1. South China University of Technology,Guangzhou 510640,Chinas2. Sichuan Institute of Science and Technology,Zigong 643000, China |
| |
| Abstract: | According to the theories in rubber mixing, such as rheological theory,instaneous power control method etc. ,a model for predicting the mix viscosity based on 5 factors,i, e. filling factor,rotor power, rotor speed, dumping temperature and ram pressure was established. The test results showed that the predicted Mooney viscosity from the model was very close to the practical value from the test,the average difference of two values was 0. 827 indicating a good predictive effect. |
| |
| Keywords: | laboratory internal mixer mix multi-factors prediction model Mooney viscosity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《橡胶工业》浏览原始摘要信息 |
|
点击此处可从《橡胶工业》下载全文 |
|
