| 辊径比对带钢轧制平直度影响的有限元模拟分析 |
| |
| 引用本文： | 赵宝禄,陆建生,宋鹏,张德丰,宋群玲,宁德宇,杨豪. 辊径比对带钢轧制平直度影响的有限元模拟分析[J]. 特殊钢, 2007, 28(4): 27-29 |
| |
| 作者姓名： | 赵宝禄 陆建生 宋鹏 张德丰 宋群玲 宁德宇 杨豪 |
| |
| 作者单位： | 1昆明理工大学材料与冶金工程学院，昆明650093 ；2昆明冶金高等专科学校教务处，昆明650033；3昆明钢铁股份有限公司板带厂，昆明650302 |
| |
| 基金项目： | 教育部留学回国人员科研启动基金 |
| |
| 摘 要： | 采用大变形弹性有限元法,借助MSC.Marc有限元软件,建立了昆明钢铁公司双机架紧凑式可逆炉卷轧机轧制过程的二维模型,对C45(0.43%～0.49%C)钢的2 mm×1200 mm带钢轧制平直度进行模拟。对带钢沿宽度方向上的应力分布进行三维模拟,得出上、下工作辊的辊径比对带钢平直度的影响。结果表明,当辊径比为420/418.5时,带钢的平直度最佳。
|
| 关 键 词： | 可逆炉卷轧机 辊径比 平直度 有限元分析 |
| 收稿时间： | 2007-01-26 |
| 修稿时间： | 2007-01-26 |
Analysis on Finite Element Simulation for Effect of Roll Diameter Ratio on Rolled Strip Flatness |
| |
| Zhao Baolu,Lu Jiansheng,Song Peng,Zhang Defeng,Song Qunling,Ning Deyu,Yang Hao. Analysis on Finite Element Simulation for Effect of Roll Diameter Ratio on Rolled Strip Flatness[J]. Special Steel, 2007, 28(4): 27-29 |
| |
| Authors: | Zhao Baolu Lu Jiansheng Song Peng Zhang Defeng Song Qunling Ning Deyu Yang Hao |
| |
| Affiliation: | 1 Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming 650093;2 Kunming Metallurgical College, Kunming 650033 ； 3 Kunming Iron and Steel Group Co Ltd, Kunming 650302 |
| |
| Abstract: | Two dimensional models of rolling process of two-stand Steckel mill at Kunming Iron and Steel has been established using heavy reduction elastic-plastic finite element method (FEM) by finite element software MSC. Marc to simu> late the flatness of 2 mm x 1 200 mm rolled strip of steel C45(0. 43% -0. 49%C). And 3-dimension simulation of stress distribution along strip width direction has been carried out to get the effect of upper/lower roll diameter ratio on strip flatness. Results showed that as roll diameter ratio was 420/418. 5, the strip flatness was optimum. |
| |
| Keywords: | Steckel Mill Roll Diameter Ratio Flatness Finite Element Analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
