首页 | 本学科首页   官方微博 | 高级检索  
     

高速连铸保护渣结晶特性的研究
引用本文:朱立光,王硕明.高速连铸保护渣结晶特性的研究[J].金属学报,1999,35(12):1280-1283.
作者姓名:朱立光  王硕明
作者单位:河北理工学院凝固理论研究室!唐山063000
摘    要:对高速连铸保护渣中Li2O,MgO,Na2O,K2O,Al2O3t F^-对保护结晶特性的影响进行了实验研究和理论分析,结果表明,Li2O含量为2%时结晶温度,结晶率最低;碱度提高,使结晶温度提高,结晶率增大;随着Na2O的加入量增大,结晶温度降低,结晶率增大,在5%-11%范围内,提高MgO含量,保护渣的玻璃性得到改善,结晶矿物颗粒变小。

关 键 词:高速连铸  保护渣  结晶特性  连铸

STUDY ON CRVSTALLIZATION PROPERLIES OF MOLDPOWDER FOR HIGH SPEED CASTING
ZHU Liguang, WANG Shooking.STUDY ON CRVSTALLIZATION PROPERLIES OF MOLDPOWDER FOR HIGH SPEED CASTING[J].Acta Metallurgica Sinica,1999,35(12):1280-1283.
Authors:ZHU Liguang  WANG Shooking
Abstract:The experimental research and theory analysis on crystallization property of mold powdersfor high speeding casting were carried out. The effects of Li2O, Na2O, K2O, MgO, A12O3 and F-oncrystallization properties were investigated, and the mechanism of crystallization progress was discussed.The results show that when the concent of Li2O is 2%, the crystallization tempreture and crystallizationratio are the lowest, and as basicity raised the crystallization tempreture and crystallization ratio increase.As concent of Na2O increased thecrystallization tempreture lowers and the crystallization ratio rises. Asconcent of MgO increased to 5%-11%, the crystallization tempreture and crystallization ratio all lower.
Keywords:high speed continuous casting  mold powder  crystallization property  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号