| 基于ADAMS的汽车起重机整机稳定性分析 |
| |
| 引用本文： | 郑夕健,张璇,费烨. 基于ADAMS的汽车起重机整机稳定性分析[J]. 机电产品开发与创新, 2009, 22(2) |
| |
| 作者姓名： | 郑夕健 张璇 费烨 |
| |
| 作者单位： | 1. 东北大学,机械工程与自动化学院,辽宁,沈阳,110004;沈阳建筑大学,辽宁,沈阳,110168
2. 沈阳建筑大学,辽宁,沈阳,110168 |
| |
| 基金项目： | 国家科技支撑计划，辽宁省重点实验室开放基金，建设部科技攻关项目 |
| |
| 摘 要： | 以QY20汽车起重机为研究对象,利用ADAMS软件建立了汽车起重机的虚拟样机模型,并对其带载回转工作过程进行了仿真,获得了在某一时刻突然卸载时支腿的振动情况曲线,据此分析汽车起重机起升最大重量时整机的稳定性.分析结果表明,该QY20汽车起重机设计合理,即使在吊臂垂直于侧方倾翻线的位置并突然卸载这一最不利的工况下,也能保持相当好的整机稳定性.同时,通过稳定性验算验证了ADAMS软件分析方法及结论的正确性.与传统的设计方法相比,文中基于ADAMS软件的设计方法更能满足高效、灵活、多样化的设计要求.
|
| 关 键 词： | 汽车起重机 动力学仿真 整机稳定性 |
Analysis for Complete Machine Stability of QY20 Truck Crane Based on ADAMS |
| |
| ZHENG Xi-Jian,ZHANG Xuan,FEI Ye. Analysis for Complete Machine Stability of QY20 Truck Crane Based on ADAMS[J]. Development & Innovation of Machinery & Electrical Products, 2009, 22(2) |
| |
| Authors: | ZHENG Xi-Jian ZHANG Xuan FEI Ye |
| |
| Affiliation: | 1. School of Mechanical Engineering &Automation;Northeastern University;Shenyang Liaoning 110014;China;2. Shenyang Jianzhu University;Shenyang Liaoning 110168;China |
| |
| Abstract: | This paper is mainly to make a study of QY20 truck crane. The Virtual Prototype model of the truck crane is built by using ADAMS software and the simulation of the working course of rotating with weight is done. The vibrating curve of the Supporting Legs when suddenly unloading is obtained. Based on this,analyze the stability of the crane system while rotating with the maximum weight. The result of analysis indicates that the design of this QY20 truck crane is reasonableness. Even if under the most disadvan... |
| |
| Keywords: | ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
