| TL电刷镀Ni-Cu-P非晶态合金工艺研究 |
| |
| 引用本文： | 张天顺,张晶秋,黄重华,张兆国. TL电刷镀Ni-Cu-P非晶态合金工艺研究[J]. 表面技术, 2001, 30(6): 10-12 |
| |
| 作者姓名： | 张天顺 张晶秋 黄重华 张兆国 |
| |
| 作者单位： | 1. 哈尔滨天龙表面技术研究所,黑龙江,哈尔滨,150080
2. 东北农业大学工程学院,黑龙江,哈尔滨,150030 |
| |
| 摘 要： | 采用电刷镀技术，利用扫描电镜、能谱分析仪、X光衍射仪等测试手段，对三元Ni-Cr-P合金刷镀溶液的配方组成、施镀工艺、镀层组织结构及成份进行了分析研究，确定了三元Ni-Cu-P镀液的组成及刷镀工艺。研究结果表明：该镀层具有良好的综合性能，并可镀厚，且镀层表观 光泽平整。
|
| 关 键 词： | 电刷镀 Ni－Cu－P 非晶合金 工艺研究 镍铜磷合金 |
| 文章编号： | 1001-3660(2001)06-0010-03 |
Study on the Technology of Ni-Cu-P Amorphous Alloy TL Brush Plating |
| |
| ZHANG Tian shun ,ZHANG Jing qiu ,HUANG Zhong hua ,ZHANG Zhao guo. Study on the Technology of Ni-Cu-P Amorphous Alloy TL Brush Plating[J]. Surface Technology, 2001, 30(6): 10-12 |
| |
| Authors: | ZHANG Tian shun ZHANG Jing qiu HUANG Zhong hua ZHANG Zhao guo |
| |
| Affiliation: | ZHANG Tian shun 1,ZHANG Jing qiu 1,HUANG Zhong hua 1,ZHANG Zhao guo 2 |
| |
| Abstract: | The formulation and complexity of three element Ni Cu P alloy plating solution,plating technology,the compose and constitution of film by SEM,spectrometer and X ray diffract meter are studied,the component of three element alloy plating solution and the plating technology are determined.The three element alloy film containing 86.60% of Ni,3.70% of Cu and 9.24% of P can be obtained .The result indicate:the plating film has super combination property,can be plated thicker and its surface is luster and leveling. |
| |
| Keywords: | Brush plating Nickel copper phosphorus Amorphous alloy Technology research |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
