Effects of auxiliary heater on annual performance of thermosyphon solar water heater simulated under variable operating conditions

A thermosyphon solar water heating system with electric auxiliary heater was simulated using the TRNSYS simulation program. Location of the auxiliary heater, inside the storage tank or connected in series between the system and the user, was studied using the TMY meteorological data for Los Angeles, California. Simulations were performed for two different water load temperatures (60 and 80°C) and for two types of daily hot water volumes (250 and 150 l). Four types of daily hot water consumption profiles were used in the present study, namely; the widely used Rand profile, continuous, evening and morning profiles. Also, the simulation is extended to cover the effects of thermal and optical properties of the flatplate collector and the volume of the storage tank. The results show that if water is drawn on a schedule corresponding to the Rand draw profile, the system operates with higher efficiency when the auxiliary heater is located in the storage tank than when the auxiliary heater is outside the storage tank. When operated with each of the other three draw schedules, however, better performance is achieved by locating the auxiliary heater outside the tank. The increase in solar fraction depends on the load profile and volume, temperature setting, as well as the quality of the collector and the storage tank volume. When the values of the parameters F_R(τα)_n and F_RU_L are changed from 0.8 and 16 kJ/h m²°C to 0.6 and 30 kJ/h m²°C, the solar fraction decreases by approximately 40–50%.