首页 | 本学科首页   官方微博 | 高级检索  
     

深水气井天然气水合物生成、沉积特性与防治方法
引用本文:王志远,张剑波,孟文波,孙宝江,孙金声,王金堂,刘大辉,王金波. 深水气井天然气水合物生成、沉积特性与防治方法[J]. 石油学报, 2021, 42(6): 776-790. DOI: 10.7623/syxb202106007
作者姓名:王志远  张剑波  孟文波  孙宝江  孙金声  王金堂  刘大辉  王金波
作者单位:1. 中国石油大学(华东)石油工程学院 山东青岛 266580;2. 中海石油(中国)有限公司湛江分公司 广东湛江 524057;3. 南方海洋科学与工程广东省实验室(广州) 广东广州 523936;4. 中集海洋工程研究院有限公司 山东烟台 264000;5. 东营市瑞丰石油技术发展有限责任公司 山东东营 257000
基金项目:国家自然科学基金面上项目(No.51974350)、国家自然科学基金重大项目(No.51991363)、南方海洋科学与工程广东省实验室(广州)人才团队引进重大专项(GML2019ZD0501)和国家重点研发计划项目(2017YFC0307604)资助。
摘    要:井筒中天然气水合物生成和沉积形成的流动障碍是影响深水气井安全高效开发的重要因素。在深水气井不同工况下多相流动特性研究的基础上,考虑不同工况下的水合物生成和沉积特点及影响因素,建立了不同工况下的水合物流动障碍预测模型,揭示了不同工况下的水合物流动障碍形成机制,探讨了不同工况下的水合物流动障碍风险及防治方法。研究结果表明:初开井、测试、关井和冷启动工况下井筒中均存在水合物生成区域,但初开井和短时间关井工况下井筒中发生水合物流动障碍的风险较小,而测试和冷启动工况下井筒中可能会发生水合物流动障碍。上述工况下井筒中的水合物沉积层生长均是非均匀分布的,水合物沉积层厚度最大的位置是发生水合物流动障碍最危险的部位。针对深水气井不同工况的具体特点,提出了不同工况下的水合物流动障碍防治措施,并探讨了一些其他可能适用于深水气井的水合物防治方法。

关 键 词:深水气井  工况  水合物流动障碍  形成机制  防治方法
收稿时间:2020-05-15
修稿时间:2021-01-05

Formation,deposition characteristics and prevention methods of gas hydrates in deepwater gas wells
Wang Zhiyuan,Zhang Jianbo,Meng Wenbo,Sun Baojiang,Sun Jinsheng,Wang Jintang,Liu Dahui,Wang Jinbo. Formation,deposition characteristics and prevention methods of gas hydrates in deepwater gas wells[J]. Acta Petrolei Sinica, 2021, 42(6): 776-790. DOI: 10.7623/syxb202106007
Authors:Wang Zhiyuan  Zhang Jianbo  Meng Wenbo  Sun Baojiang  Sun Jinsheng  Wang Jintang  Liu Dahui  Wang Jinbo
Affiliation:1. School of Petroleum Engineering, China University of Petroleum, Shandong Qingdao 266580, China;2. Zhanjiang Branch, CNOOC China Limited, Guangdong Zhanjiang 524057, China;3. Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou), Guangdong Guangzhou 523936, China;4. CIMC Offshore Engineering Insititute Co., Ltd., Shandong Yantai 264000, China;5. Dongying Ruifeng Petroleum Technology Co., Ltd., Shandong Dongying 257000, China
Abstract:The flow barrier formed by the formation and deposition of gas hydrates in the wellbore is an important factor affecting the safe and efficient development of deepwater gas wells. Based on studying the multiphase flow characteristics under different working conditions in deepwater gas wells, considering the formation and deposition characteristics of hydrates and the influencing factors under different working conditions, this paper establishes a prediction model of and revelas the formation mechanism of the flow barrier of hydrates under different working conditions, and explores the risks of occurrence of the flow barrier of hydrates under different working conditions, as well as prevention methods. The research results show that there are areas where hydrates are formed in the wellbore under the working conditions of initial open, testing, shut-in and cold start. However, there are less risks of occurrence of the flow barrier of hydrates in wellbore under initial open flow and short-time shut-in conditions, while the flow barrier of hydrates may occur in wellbore under testing and cold start conditions. Under the above conditions, the hydrate deposits in wellbore is non-uniformly distributed, and the flow barrier of hydrates may occur in the place where the thickness of the hydrate deposits is the largest. In view of the specific characteristics under different working conditions of deepwater gas wells, this paper proposes some measures to prevent and control the flow barrier of hydrates under different working conditions, and discusses some other hydrate prevention methods that may be applicable to deepwater gas wells.
Keywords:deepwater gas well  working conditions  flow barrier of hydrates  formation mechanism  prevention method  
点击此处可从《石油学报》浏览原始摘要信息
点击此处可从《石油学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号