首页 | 本学科首页   官方微博 | 高级检索  
     

聚合物在等温圆管口模中流动的数值模拟
引用本文:肖建华,柳和生,黄兴元,卢臣,江青松.聚合物在等温圆管口模中流动的数值模拟[J].高分子材料科学与工程,2008,24(10).
作者姓名:肖建华  柳和生  黄兴元  卢臣  江青松
作者单位:南昌大学机械工程学院聚合物加工研究室
摘    要:以挤出圆管为研究对象,采用PTT粘弹本构模型和通用的有限元POLYFLOW软件,对塑料熔体在不同挤出口模内的二维粘弹性等温流动进行了数值模拟。通过数值模拟得出了CPU时间、压力和离模膨胀比等结果。研究表明,过渡段的设计会对挤出压力产生明显的影响,但对离模膨胀比没有影响,用三次插值多项式表征的流线型口模具有较小的挤出压力。

关 键 词:流线型  挤出口模  数值模拟

Numerical Simulation of Two Dimention Isothermal Circle Die Flow of Polymer
XIAO Jian-hua,LIU He-sheng,HUANG Xing-yuan,LU Chen,JIANG Qing-song.Numerical Simulation of Two Dimention Isothermal Circle Die Flow of Polymer[J].Polymer Materials Science & Engineering,2008,24(10).
Authors:XIAO Jian-hua  LIU He-sheng  HUANG Xing-yuan  LU Chen  JIANG Qing-song
Abstract:The numerical simulation used POLYFLOW software was implemented for the two dimensional isothermal PTT polymer melt flow within an extrusion die with circle.Especially,the CPU times and power distributions and die swell ratio were analyzed in details.The analysis shows that the transition zone of the die plays a significant role on power distributions,but has no influence on dies swell ratio. Polymer melts flow through streamlined extrusion die with third order polynomial equation has the least power.
Keywords:streamlined  extrusion die  magnitude simulation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号