| Ni-ZrO2纳米复合电镀工艺研究 |
| |
| 引用本文： | 王琳,孙本良,许为,王兴丽,张雷.Ni-ZrO2纳米复合电镀工艺研究[J].表面技术,2012,41(1):67-69,101. |
| |
| 作者姓名： | 王琳 孙本良 许为 王兴丽 张雷 |
| |
| 作者单位： | 辽宁科技大学材料与冶金学院,鞍山,114051;中冶焦耐工程技术有限公司环工所,鞍山,114002 |
| |
| 基金项目： | 辽宁省教育厅重点实验室资助项目 |
| |
| 摘 要： | 采用正交实验法,对铜表面电沉积镍基纳米ZrO2复合镀层的工艺进行了研究,观察了复合镀层的表面及截面形貌,并对其耐磨性能进行了测试分析。所涉及实验条件下的最优工艺为:阴极电流密度4A/dm2,镀液温度60℃,极间距为12cm。采用此最优工艺条件,得到了晶粒细小,表面平整、光滑,显微组织致密、均匀的Ni-ZrO2纳米复合镀层,且复合镀层的显微硬度比纯镍镀层有明显提高。
|
| 关 键 词： | 纳米复合镀层 电镀工艺 显微硬度 耐磨性能 |
| 收稿时间： | 2011/9/19 0:00:00 |
| 修稿时间： | 2012/2/20 0:00:00 |
A Study on Ni-ZrO2 Nano-Composite Plating |
| |
| WANG Lin,SUN Ben-liang,XU Wei,WANG Xing-li and ZHANG Lei.A Study on Ni-ZrO2 Nano-Composite Plating[J].Surface Technology,2012,41(1):67-69,101. |
| |
| Authors: | WANG Lin SUN Ben-liang XU Wei WANG Xing-li and ZHANG Lei |
| |
| Affiliation: | 1(1.School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,China;2.ACRE Coking & Refractory Engineering Consulting Corporation,MCC,Anshan 114002,China) |
| |
| Abstract: | Nickel nano-ZrO2 composite coatings electrodeposition process were studied by orthogonal test method in the copper.Besides,the surface and the section morphology of the composite coating were also observed,wear resistance of the composite coating was analyzed.The optimized technological conditions are cathode current density: 4 A/dm2,the bath temperature: 60 ℃,the distance between two electrodes: 12 cm.In this optimum process conditions get a flat morphology and compact microstructure Ni-ZrO2 nano-composite coating,and its micro-hardness is remarkably improved compared to pure nickel plating. |
| |
| Keywords: | nano-composite coating electroplating process micro-hardness wear resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
