|
|||||
|
|
| 基于数据融合的圆锥滚子端面侧摆自动检测 | |
| 引用本文： | 卢胜利,祝玲,王福平,梁伟昌,许建业.基于数据融合的圆锥滚子端面侧摆自动检测[J].机床与液压,2005(9):114-116. |
| 作者姓名： | 卢胜利 祝玲 王福平 梁伟昌 许建业 |
| 作者单位： | 1. 上海大学机电工程与自动化学院,上海,200072 2. 西北第二民族学院,银川,750021 3. 西北轴承股份有限公司,银川,750021 |
| 摘 要： | 本文介绍的圆锥滚子端面侧摆自动检测系统，采用多周期检测和数据融合处理方法，能够有效滤除采样中的干扰信号、提高端面侧摆检测的准确性。实际使用结果表明，该系统符合圆锥滚子轴承检测规程，可以实现圆锥滚子端面侧摆自动检测和自动分拣。 |
| 关 键 词： | 自动检测 数据融合 圆锥滚子 端面侧摆 |
| 文章编号： | 1001-3881(2005)9-114-3 |
| 收稿时间： | 2004-05-18 |
| 修稿时间： | 2004年5月18日 |
Auto - measuring for Roller Large End Face Run - out of Tapered Roller Based on Data Fusion |
|
| LU Sheng-li,ZHU Ling,WANG Fu-ping,LIANG Wei-chang,XU Jian-ye.Auto - measuring for Roller Large End Face Run - out of Tapered Roller Based on Data Fusion[J].Machine Tool & Hydraulics,2005(9):114-116. | |
| Authors: | LU Sheng-li ZHU Ling WANG Fu-ping LIANG Wei-chang XU Jian-ye |
| Abstract: | A kind of auto-measuring system for roller large end face run-out of tapered roller was introduced, It is based on more cycle measure and data fusion that are very effective for eliminating disturbance during sampling and raising veracity of auto-measuring. The application shows that this system accords with the rule of measuring for tapered roller bearing, arid can realize auto-measuring for end face run-out and auto-picking. |
| Keywords: | Auto-measuring Data fusion Tapered roller End face run-out |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |