| 热轧辊型技术对冷轧钢卷局部突起缺陷的抑制 |
| |
| 引用本文： | 于斌,岳晓丽,余广夫,连家创,刘宏民.热轧辊型技术对冷轧钢卷局部突起缺陷的抑制[J].钢铁,2007,42(7):47-50. |
| |
| 作者姓名： | 于斌 岳晓丽 余广夫 连家创 刘宏民 |
| |
| 作者单位： | 燕山大学机械工程学院,亚稳材料制备技术与科学国家重点实验室,河北,秦皇岛,066004;攀枝花钢铁(集团)公司热轧厂,四川,攀枝花,617062 |
| |
| 基金项目： | 国家自然科学基金
,
上海宝钢集团公司资助项目 |
| |
| 摘 要： | 为解决由热轧带钢不良断面形状遗传到冷轧带钢而引起的钢卷局部突起缺陷,在分析猫耳形磨损辊型对热轧带钢断面形状不良影响的基础上,提出了以抑制热轧带钢边部增厚和局部高点相对高度为目的的工作辊余弦辊型.模拟计算和实验表明,余弦辊型明显改善了带钢断面形状、降低了边部增厚和局部高点的相对高度,解决了冷轧钢卷局部突起缺陷问题,并为现场解决类似问题提供了新思路.
|
| 关 键 词： | 轧辊磨损 带钢断面 局部突起 辊型技术 |
| 文章编号： | 0449-749X（2007）07-0047-04 |
| 修稿时间： | 2006-11-08 |
Control of Local Protuberance of Cold Rolled Coil by Modifying Hot Rolling Roller Contour |
| |
| YU Bin,YUE Xiao-li,SHE Guang-fu,LIAN Jia-chuang,LIU Hong-min.Control of Local Protuberance of Cold Rolled Coil by Modifying Hot Rolling Roller Contour[J].Iron & Steel,2007,42(7):47-50. |
| |
| Authors: | YU Bin YUE Xiao-li SHE Guang-fu LIAN Jia-chuang LIU Hong-min |
| |
| Affiliation: | 1. Institute of Mechanical Engineering, National Key Laboratory of Metastable Materials Science and Technology of Yanshan University, Qinhuangdao 066004, Hebei, China; 2. Hot Strip Mill, Panzhihua Iron and Steel (Group |
| |
| Abstract: | In order to eliminate local protuberance of cold rolled coil caused by defect profile of cold rolled strip, inherited from defect profile of hot rolled strip, a new cosine contour of hot rolling work roller was presented based on the analysis of defect profile of hot rolled strip caused by feline ear type of roller wear to control edge thickness and local high point of hot rolled strip. Simulation and industrial experiment showed that profile of strip is improved; edge thickness deviation and local high point are reduced. |
| |
| Keywords: | roller wear strip section local protuberance roller contour |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
