| 内啮合弧面凸轮机构及其CAD |
| |
| 引用本文： | 张高峰,冯建军,谭援强.内啮合弧面凸轮机构及其CAD[J].机械传动,2004,28(6):36-38. |
| |
| 作者姓名： | 张高峰 冯建军 谭援强 |
| |
| 作者单位： | 湘潭大学机械工程学院,湖南,湘潭,411105 |
| |
| 基金项目： | 湖南省科技厅计划项目资助 (2 0 0 2GKY0 1 32 ) |
| |
| 摘 要： | 根据内啮合弧面凸轮机构的特点 ,基于齐次坐标变换和空间机构的共轭啮合原理 ,推导了内啮合弧面凸轮的轮廓曲面方程和压力角方程 ,利用UG软件的二次开发模块开发了内啮合弧面凸轮的三维CAD软件 ,最后通过实例对软件进行了验证。内啮合弧面凸轮机构可用作高效大转矩的减速装置 ,有很好的应用前景与推广价值。
|
| 关 键 词： | 内啮合弧面凸轮 矩阵变换 UG软件 CAD |
| 文章编号： | 1004-2539(2004)06-0036-03 |
| 修稿时间： | 2004年2月18日 |
The Inner Engagement Globoidal Cams Mechanism and its CAD |
| |
| Zhang Gaofeng,Feng Jianjun,Tan Yuanqiang.The Inner Engagement Globoidal Cams Mechanism and its CAD[J].Journal of Mechanical Transmission,2004,28(6):36-38. |
| |
| Authors: | Zhang Gaofeng Feng Jianjun Tan Yuanqiang |
| |
| Abstract: | The inner engagement globoidal cams mechanism is put forward in this paper. Based on the matrix transformation theory and the conjugate engagement theory of spatial mechanism ,the surface equation and pressure angle equation of the inner engagement globoidal cams mechanism are attained.The software of the three dimensional modeling of the inner engagement globoidal cams is programmed based on the UG/open module of UG software and verified through an example.The inner engagement globoidal cams mechanism can be used for the high efficency and high torque speed reducer , and shows bright future in application. |
| |
| Keywords: | Inner engagement globoidal cams Matrix transformation UG software CAD |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
