| 基于有限元CAE的回转体零件凝固工艺数值优化 |
| |
| 引用本文： | 罗蓬,胡侨丹.基于有限元CAE的回转体零件凝固工艺数值优化[J].热加工工艺,2005(7):3-4,10. |
| |
| 作者姓名： | 罗蓬 胡侨丹 |
| |
| 作者单位： | 1. 浙江大学CAD&CG国家重点实验室,浙江,杭州,310027;贵州工业大学,贵州,贵阳,550003
2. 浙江大学CAD&CG国家重点实验室,浙江,杭州,310027 |
| |
| 基金项目： | 浙江大学CAD&CG国家重点实验室基金资助 |
| |
| 摘 要： | 根据有限元CAE对回转体铸钢件的凝固进程进行了数值模拟。通过CAE反馈信息进行了凝固工艺的数值优化设计。模拟表明，按照传统比例法设计的冒口能够保证铸件质量，但冒口数目多，工艺出品率偏低。通过减少冒口数目并适当设置冷铁，既消除缺陷，又提高出品率。通过模拟优化的实施，预测工艺出品率将提高12％。
|
| 关 键 词： | 有限元CAE 回转体件 凝固工艺优化 |
| 文章编号： | 1001-3814(2005)07-0003-02 |
Numerical Optimization of Solidification Process for Symmetrical Part Based on Finite Element Modeling |
| |
| LUO Peng,HU Qiaodan.Numerical Optimization of Solidification Process for Symmetrical Part Based on Finite Element Modeling[J].Hot Working Technology,2005(7):3-4,10. |
| |
| Authors: | LUO Peng HU Qiaodan |
| |
| Affiliation: | LUO Peng 1,2,HU Qiaodan 1 |
| |
| Abstract: | According to finite element modeling, simulation of solidification process of symmetrical casting was made. The optimization of casting process was realized by means of CAE feedbacks. The simulation results show that using the risers designed by conventional proportional method based on hot-spot status, the quality of product is insured whereas process yield (PY) is insufficient due to large number of the risers. The porcess optimization of casting show that a positive optimized effect due to suitable chill combined with riser reduction guarantees free of defects while the PY is enhanced by up to 12 percent. |
| |
| Keywords: | finite element modeling symmetrical casting optimization of solidification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
