CdTe-CdS solar cells — Production in a new baseline and investigation of material properties

In this paper, we describe our new baseline for CSS-CdTe-CdS solar cells on 10 × 10 cm² substrates. The deposition of the p-n junction and all the following steps were performed at the Institut für Festkörperphysik (IFK) in Jena. Using the new baseline, we are already able to produce solar cells with similar properties as commercial ones. In the batch type process, all manufacturing steps can be investigated separately. We employ Rutherford backscattering spectrometry (RBS), X-ray diffraction (XRD) and external quantum efficiency (EQE) measurements to characterise the structure of the bulk materials and interfaces. It is demonstrated that by RBS the front contact becomes accessible for thinned CdTe films. At the back contact, RBS spectra show a tellurium accumulation which is due to etching. This tellurium rich layer is confirmed by XRD with Rietveld refinement. The intermixing at the CdS-CdTe interface caused by the activation step is quantified by a bandgap determination based on EQE measurements. From the bandgap energy of the CdTe_1 − xS_x compound, we calculated the sulphur fraction x at the interface. XRD measurements imply that the activation step induces a (111) texture in CdTe. With regard to an improved manufacturing process, our cells are compared to industrial cells produced by Antec Solar Energy.