| 铝合金薄板脉冲MIG焊低热输入工艺 |
| |
| 引用本文： | 徐敏,薛家祥,黄雯锦. 铝合金薄板脉冲MIG焊低热输入工艺[J]. 焊接学报, 2017, 38(6): 110-114 |
| |
| 作者姓名： | 徐敏 薛家祥 黄雯锦 |
| |
| 作者单位： | 华南理工大学 机械与汽车工程学院, 广州 510640 |
| |
| 基金项目： | 广东省省科学院2016年度引进人才专项资金项目，广东省省部产学研资助项目 |
| |
| 摘 要： | 利用数字化焊接电源在AA6061铝合金板上进行了单脉冲，双脉冲和梯形波三种脉冲熔化极焊接工艺的平板堆焊试验.分别通过改变基值时间、焊接速度两种方式来探讨焊接工艺参数对铝合金薄板脉冲MIG焊输入能量及显微组织的影响机理.结果表明，提高焊接速度和通过调节低能量脉冲群的脉冲个数与调节低能量脉冲群的脉冲基值时间来增大基值时间均可以降低热输入，且通过增大基值时间来降低热输入的方式能够细化焊缝组织中的晶粒尺寸，而增大焊接速度则可以提高焊接接头的硬度.
|
| 关 键 词： | 低热输入 脉冲焊接 晶粒细化 硬度 |
| 收稿时间： | 2017-03-16 |
Research on low heat input pulsed MIG welding process for aluminum alloy sheet |
| |
| XU Min,XUE Jiaxiang and HUANG Wenjin. Research on low heat input pulsed MIG welding process for aluminum alloy sheet[J]. Transactions of The China Welding Institution, 2017, 38(6): 110-114 |
| |
| Authors: | XU Min XUE Jiaxiang HUANG Wenjin |
| |
| Affiliation: | School of Mechanical&Automotive Engineering, South China University of Technology, Guangzhou 510640, China |
| |
| Abstract: | Digital welding power supply was used for carrying out Bead-On-Plate welding experiments by single pulsed, double pulsed, and trapezoid modulated pulsed gas metal arc welding. Base current and welding speed were adjusted to investigate the effect of current parameters on heat input of the above welding methods. Effect of different current parameters on solidification structure of welds was also discussed. Results indicate that grain refinement of welds can be achieved by lower heat input, and hardness of welded joints can be improved by faster welding speed. |
| |
| Keywords: | low heat input pulsed welding grain refinement hardness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
