| 钛合金与WC-17Co涂层界面结合性能分析 |
| |
| 引用本文： | 纪朝辉,孙振,丁坤英,王志平.钛合金与WC-17Co涂层界面结合性能分析[J].焊接学报,2017,38(2):5-9. |
| |
| 作者姓名： | 纪朝辉 孙振 丁坤英 王志平 |
| |
| 作者单位： | 中国民航大学 天津市民用航空器适航与维修重点实验室, 天津 300300 |
| |
| 基金项目： | 国家自然科学基金青年基金资助项目，中央高校基本科研业务经费中国民航大学专项基金资助项目，中国民航局科技计划资助项目 |
| |
| 摘 要： | 采用超音速火焰喷涂技术在Ti-6Al-4V合金表面制备WC-17Co涂层，从显微形貌、界面氧化行为、裂纹扩展形式等方面系统分析了WC-17Co涂层与Ti-6Al-4V基体界面断裂失效原因，并利用四点弯曲法测量了WC-17Co与Ti-6Al-4V合金的平均断裂能量释放率.结果表明，热喷涂过程使Ti-6Al-4V的表面氧化相含量显著提高.氧化后Ti-6Al-4V的表面显微硬度达到322.4 HV，熔融粒子撞击到Ti-6Al-4V表面很难对基体造成明显的塑性变形，不能形成有效咬合，使得钛合金与WC-17Co涂层的结合性能偏低.
|
| 关 键 词： | 超音速火焰喷涂 Ti-6Al-4V合金 WC-17Co涂层 断裂能量释放率 氧化 |
| 收稿时间： | 2015/1/7 0:00:00 |
Analysis of bonding properties between WC-17Co coating and titanium alloy |
| |
| JI Zhaohui,SUN Zhen,DING Kunying and WANG Zhiping.Analysis of bonding properties between WC-17Co coating and titanium alloy[J].Transactions of The China Welding Institution,2017,38(2):5-9. |
| |
| Authors: | JI Zhaohui SUN Zhen DING Kunying and WANG Zhiping |
| |
| Affiliation: | Tianjin Key Laboratory for Civil Aircraft Airworthiness and Maintenance, Civil Aviation University of China, Tianjin 300300, China |
| |
| Abstract: | A WC-17Co coating was fabricated on the face of titanium alloy by using high velocity oxy-fuel (HVOF) technology. The bonding properties between WC-17Co coating and Ti-6Al-4V substrate were discussed. The reasons of boundary fracture were analyzed through the microscopic morphology, oxidation behavior, and the form of crack propagation. Critical strain energy release rate Gss of WC-17Co/Ti-6Al-4V is measured by four-point bending test. The low interface bonding strength of WC-17Co/Ti-6Al-4V was ascribed to the increased micro-hardness (322.4 HV) of Ti-6Al-4V after oxidization, so it does not generate apparent deformation when molten particles impact on its surface. |
| |
| Keywords: | HVOF Ti-6Al-4V WC-17Co critical strain energy release rate oxidation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
