| 基于Saber的DC-DC变换器控制环路仿真研究 |
| |
| 引用本文： | 黄 鹰,李 勇,姜学想. 基于Saber的DC-DC变换器控制环路仿真研究[J]. 湖南工业大学学报, 2014, 28(1): 53-57 |
| |
| 作者姓名： | 黄 鹰 李 勇 姜学想 |
| |
| 摘 要： | 以CCM模式下的BUCK电压源为例，采用Saber仿真软件对电源控制环路进行辅助设计，并对BUCK电压源的输出动态特性进行仿真分析。仿真结果表明，在负载变化的范围内，电压很快达到了预期稳态，这说明设计电源控制环路的方法是正确可行的。
|
| 关 键 词： | BUCK电压源；控制环路；Saber |
| 收稿时间： | 2013-10-08 |
Simulation Research of DC-DC Converter Control Loop Based on Saber |
| |
| Huang Ying,Li Yong and Jiang Xuexiang. Simulation Research of DC-DC Converter Control Loop Based on Saber[J]. Journal of Hnnnan University of Technology, 2014, 28(1): 53-57 |
| |
| Authors: | Huang Ying Li Yong Jiang Xuexiang |
| |
| Abstract: | With BUCK voltage source in CCM mode as an example, designed the power control loop by using Saber simulation software, and made simulation analysis on the output dynamic characteristics of BUCK voltage source. The simulation results show that the voltage quickly achieves the desired steady state in the range of load changes. It suggests that the design method of power control loop is feasible. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《湖南工业大学学报》浏览原始摘要信息 |
|
点击此处可从《湖南工业大学学报》下载全文 |
