| 反应型乳化剂对保护膜用丙烯酸酯乳液型压敏胶性能的影响 |
| |
| 引用本文： | 刘继承,王锋,胡剑青,涂伟萍.反应型乳化剂对保护膜用丙烯酸酯乳液型压敏胶性能的影响[J].精细化工,2009,26(5). |
| |
| 作者姓名： | 刘继承 王锋 胡剑青 涂伟萍 |
| |
| 作者单位： | 华南理工大学,化学与化工学院,广东,广州,510640 |
| |
| 摘 要： | 采用预乳化法制备了丙烯酸酯压敏胶乳液,探讨了不同乳化剂体系对压敏胶物理性能的影响。FTIR测试表明,反应型乳化剂参与了反应;TEM测试显示,反应型乳化剂体系所得乳液粒径小,分布均匀。实验结果表明:当w(复合乳化剂)=3%,m(ANPEO10)∶m(DNS-458)∶m(DNS-501)=1.5∶1.1∶0.4时,所得乳液的固体分质量分数为48.03%,单体转化率达到97.66%,乳液黏度为38.8 s,平均粒径为238 nm,压敏胶的初粘力能吸住8号钢球,持黏性大于24 h,180°剥离强度达到0.304 N/mm。贴在不锈钢表面的保护膜经80℃烘烤24 h后,不锈钢表面无残胶和雾影。
|
| 关 键 词： | 反应型乳化剂 保护膜 压敏胶 丙烯酸酯乳液 |
Effect of Reactive Emulsifier on the Pressure Sensitive Adhesive of Acrylic Emulsion for Protective Film |
| |
| LIU Ji-cheng,WANG Feng,HU Jian-qing,TU Wei-ping.Effect of Reactive Emulsifier on the Pressure Sensitive Adhesive of Acrylic Emulsion for Protective Film[J].Fine Chemicals,2009,26(5). |
| |
| Authors: | LIU Ji-cheng WANG Feng HU Jian-qing TU Wei-ping |
| |
| Affiliation: | College of Chemistry and Chemical Engineering;South China University of Technology;Guangzhou 510640;Guangdong;China |
| |
| Abstract: | The pressure-sensitive adhesive(PSA) of acrylic emulsion were synthesized by pre-emulsion polymerization,and the effects of different kinds of emulsifier systems on the physical properties of PSA were discussed.The emulsion and their films were characterized by FTIR and TEM.The results show that reactive emulsifier is effectively involved in the copolymerization,and the synthesized polymer emulsion has smaller particle sizes and good distribution.When w(compound emulsifiers)=3%(based on total monomers),and ... |
| |
| Keywords: | reactive emulsifier protective film pressure sensitive adhesive acrylate emulsion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
