| 厚0.15mm宽幅取向硅钢的轧制 |
| |
| 引用本文： | 王崇涛,姚建权. 厚0.15mm宽幅取向硅钢的轧制[J]. 轧钢, 2005, 22(4): 52-54 |
| |
| 作者姓名： | 王崇涛 姚建权 |
| |
| 作者单位： | 武汉钢铁股份有限公司冷轧硅钢片厂,湖北,武汉,430083 |
| |
| 摘 要： | 为在设计最小可轧厚度为0．20mm的森吉米尔轧机上生产厚0．15mm宽幅冷轧硅钢薄板，分析了影响最小可轧厚度的因素后，通过减小工作辊辊径、降低乳化液浓度、控制张力设定等措施，取得了成功。
|
| 关 键 词： | 冷轧薄板 辊径 张力 工艺润滑 |
| 文章编号： | 1003-9996(2005)04-0052-03 |
| 收稿时间： | 2005-05-27 |
| 修稿时间： | 2005-05-27 |
Rolling 0.15mm thickness oriented silicon sheet |
| |
| WANG Chong-tao,YAO Jian-quan. Rolling 0.15mm thickness oriented silicon sheet[J]. Steel Rolling, 2005, 22(4): 52-54 |
| |
| Authors: | WANG Chong-tao YAO Jian-quan |
| |
| Abstract: | The 0.15mm thickness oriented silicon sheet was rolling in Sendzimir mill, which smallest thickess is designed as 0.2mm. The main technology measures were introduced, such as reducing diameter of work roll, decreasing concentration of emulsion and controling tension, etc. |
| |
| Keywords: | cold rolled sheet diameter of roll tension technology lubrication |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
