Hall and photoluminescence studies of effects of the thickness of an additional In0.3Ga0.7As layer in the center of In0.15Ga0.85As/Al0.25Ga0.75As/GaAs high electron mobility transistors

In order to reduce the noise and carrier–donor scattering and thereby increase the carrier mobility of the pseudomorphic AlGaAs/InGaAs high electron mobility transistors (pHEMTs), we have grown Al_0.25Ga_0.75As/In_0.15Ga_0.85As/In_0.3Ga_0.7As/GaAs pHEMTs with varied In_0.3Ga_0.7As thickness, and studied the effects of the In_0.3Ga_0.7As thickness on the electron mobility and sheet density by Hall measurements and photoluminescence measurements. We calculated the electron and hole subbands and obtained good agreement between calculated and measured PL energies. It was found that the additional In_0.3Ga_0.7As layer could be used to reduce the carrier–donor scattering, but due to the increased interface roughness as the In_0.3Ga_0.7As layer becomes thicker, the interface scattering reduced the electron mobility. An optimal thickness of the In_0.3Ga_0.7As was found to be 2 nm.