| 外界环境因素对热塑性橡塑共混开孔材料的影响Ⅱ橡塑共混开孔材料的蠕变行为 |
| |
| 引用本文： | 崔毅,窦艳丽,王宗宝,沙鹏宇,王国英.外界环境因素对热塑性橡塑共混开孔材料的影响Ⅱ橡塑共混开孔材料的蠕变行为[J].塑料工业,2003,31(9):18-21. |
| |
| 作者姓名： | 崔毅 窦艳丽 王宗宝 沙鹏宇 王国英 |
| |
| 作者单位： | 1. 中国科学院长春应用化学研究所,吉林,长春,130022
2. 吉林大学,吉林,长春,130025 |
| |
| 基金项目： | 中国科学院知识创新工程重大项目 (KZCX1-SW -19-5 -0 4) |
| |
| 摘 要： | 研究了退火温度和时间及退火后放置时间对橡塑开孔材料透水速率的影响。结果表明：开孔材料透水速率随退火温度的升高而下降，退火温度越高，下降的幅度越大；同一退火温度下，透水速率随退火后放置时间的增长而降低，放置时间越长下降的幅度越大；透水速率随退火时间的增长而下降，退火时间越长，下降幅度越大。
|
| 关 键 词： | 橡塑共混物 开孔材料 退火 透水速率 聚乙烯 蠕变行为 热塑性 |
| 文章编号： | 1005-5770(2003)09-0018-03 |
| 修稿时间： | 2003年6月12日 |
Effect of Outside Environment Factor on Porous Rubber-thermoplastic Blends: Ⅱ Creep Behavior of Porous Rubber-thermoplastic Blends |
| |
| CUI Yi ,DOU Yan li ,WANG Zong bao ,SHA Peng yu ,WANG Guo ying.Effect of Outside Environment Factor on Porous Rubber-thermoplastic Blends: Ⅱ Creep Behavior of Porous Rubber-thermoplastic Blends[J].China Plastics Industry,2003,31(9):18-21. |
| |
| Authors: | CUI Yi DOU Yan li WANG Zong bao SHA Peng yu WANG Guo ying |
| |
| Affiliation: | CUI Yi 1,DOU Yan li 2,WANG Zong bao 1,SHA Peng yu 1,WANG Guo ying 1 |
| |
| Abstract: | This article mainly analyzes the effect of annealing temperature, time and shelf time on the water saturating rate of porous rubber thermoplastic blend system The results showed that the water saturating rate of the porous materials decrease with the increase of annealing temperature,the higher the annealing temperature,the more the rate decreased When the annealing temperature was the same,the water saturating rate decreases with the increase of the shelf time after the annealing,and the longer the shelf time,the more the rate decreased The water saturating rate decreased with the increase of annealing time,the longer the annealing time,the more the rate decreased |
| |
| Keywords: | Rubber thermoplastics Blend Porous Materials Annealing Water Saturating Rate PE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
