| Abstract: | The design of a semicontinuous emulsion polymerization process, primarily based on theoretical calculations, has been carried out with the objective of achieving overall independent control over the latex particle size, the monodispersity in the particle size distribution, the homogeneous copolymer composition, the concentration of functional groups (e.g., carboxyl groups), and the glass‐transition temperature with n‐butyl methacrylate/n‐butyl acrylate/methacrylic acid as a model system. The surfactant coverage on the latex particles is very important for maintaining a constant particle number throughout the feed process, and this results in the formation of monodisperse latex particles. A model has been set up to calculate the surfactant coverage from the monomer feed rate, surfactant feed rate, desired solid content, and particle size. This model also leads to an equation correlating the polymerization rate to the instantaneous conversion of the monomer or comonomer mixture. This equation can be used to determine the maximum polymerization rate, only below or at which monomer‐starved conditions can be achieved. The maximum polymerization rate provides guidance for selecting the monomer feed rate in the semicontinuous emulsion polymerization process. The glass‐transition temperature of the resulting carboxylated poly(n‐butyl methacrylate‐co‐n‐butyl acrylate) copolymer can be adjusted through variations in the compositions of the copolymers with the linear Pochan equation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 30–41, 2003 |
