| 立式双摆角铣头几何误差数学建模与解耦研究 |
| |
| 引用本文： | 高秀峰,刘春时,李焱,林剑峰. 立式双摆角铣头几何误差数学建模与解耦研究[J]. 制造技术与机床, 2011, 0(12) |
| |
| 作者姓名： | 高秀峰 刘春时 李焱 林剑峰 |
| |
| 作者单位： | 沈阳机床(集团)设计研究院有限公司; |
| |
| 基金项目： | “高档数控机床与基础制造装备”科技重大专项:高速/复合数控机床及关键技术创新能力平台(2011ZX04016-021) |
| |
| 摘 要： | 通过激光干涉仪与RX10回转基准分度器对B轴与C轴的定位误差进行检测与补偿,使得几何误差总数由12项减少为8项,因此,最终可以通过几何误差数学模型求得各几何误差的唯一解。
|
| 关 键 词： | 立式双摆角铣头 几何误差 数学模型 解耦 |
Study on mathematical modeling and decoupling of geometric errors of vertical Bi-rotary milling head |
| |
| GAO Xiufeng,LIU Chunshi,LI Yan,LIN Jianfeng. Study on mathematical modeling and decoupling of geometric errors of vertical Bi-rotary milling head[J]. Manufacturing Technology & Machine Tool, 2011, 0(12) |
| |
| Authors: | GAO Xiufeng LIU Chunshi LI Yan LIN Jianfeng |
| |
| Affiliation: | GAO Xiufeng,LIU Chunshi,LI Yan,LIN Jianfeng (Shenyang Machine Tool Design&Research Institute Co.,Ltd.,Shenyang 110142,CHN) |
| |
| Abstract: | By using Renishaw laser interferometer and RX10 reference rotary indexer to measure and compensate the two position errors of C axis and B axis, the amount of geometric errors reduced to eight, and geometric errors can be obtained by solving geometric errors mathematical modeling finally. |
| |
| Keywords: | Vertical Bi-rotary Milling Head Geometric Errors Mathematical Modeling Decoupling |
| 本文献已被 CNKI 等数据库收录！ |
|
