| 炮弹壳体液态模锻模设计 |
| |
| 引用本文： | 熊洪淼,李春,王家宣,李达.炮弹壳体液态模锻模设计[J].模具工业,2008,34(2):61-63. |
| |
| 作者姓名： | 熊洪淼 李春 王家宣 李达 |
| |
| 作者单位： | 南昌航空大学材料学院,江西,南昌,330063 |
| |
| 摘 要： | 采用液态模锻工艺生产杯形、薄壁深筒形炮弹壳体,依据零件图设计了液态模锻工艺用锻件图、试验用模具,并生产出试验产品。经过试验产品分析,最终设计制造出生产用模具。模具结构简单、紧凑,工作平稳,生产的零件符合设计要求。
|
| 关 键 词： | 炮弹壳体 液态模锻 模具设计 |
| 文章编号： | 1001-2168（2008）02-0061-03 |
| 收稿时间： | 2007-10-19 |
| 修稿时间： | 2007年10月19 |
Design of liquid forging die for shot's shell |
| |
| XIONG Hong-miao,LI Chun,WANG lia-xuan,LI Da.Design of liquid forging die for shot's shell[J].Die & Mould Industry,2008,34(2):61-63. |
| |
| Authors: | XIONG Hong-miao LI Chun WANG lia-xuan LI Da |
| |
| Abstract: | The liquid forging technique was used to form cyathiform, thin wall and deep cylindrical shaped cannonball shell. The forging figure used for the liquid forging process, a die for trial production were designed based on the part drawing. After an analysis on the trial products, a die for the practical manufacturing was made, which is compact in structure and reliable in operation. The finished shells meet the requirements of design. |
| |
| Keywords: | cannonball shell liquid forging die design |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
