Microstructure and mechanical properties of friction stir lap welded Mg/Al joint assisted by stationary shoulder |
| |
Authors: | Shude Ji Zhengwei Li |
| |
Affiliation: | 1.Faculty of Aerospace Engineering,Shenyang Aerospace University,Shenyang,China;2.State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,Harbin,China |
| |
Abstract: | Using magnesium alloy as upper sheet, 3 mm-thick AZ31 magnesium alloy and 6061 aluminum alloy were joined using friction stir lap welding assisted by stationary shoulder. The effects of tool rotating speed on cross-sections, microstructure and mechanical properties of Mg/Al lap joints were mainly discussed. Results showed that stationary shoulder contributed to joint formation, by which stir zones (SZ) were characterized by big onion rings after welding. Because of the big forging force exerted by stationary shoulder, the upper region of hook was well bonded. SZ showed much higher hardness because of intermetallic compounds (IMCs). The bonding conditions at the base material (BM)/SZ interface at advancing side and the hook region played important roles on joint lap shear properties. The X-ray diffraction pattern analysis revealed that the main IMCs were Al3Mg2 and Al12Mg17. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|