| 用于低温贮箱的铝合金-硬质聚氨酯泡沫夹芯共底设计与分析 |
| |
| 引用本文： | 李克诚,杨雷,高东岳,柳敏静,徐新生,武湛君. 用于低温贮箱的铝合金-硬质聚氨酯泡沫夹芯共底设计与分析[J]. 复合材料学报, 2021, 38(3): 911-919. DOI: 10.13801/j.cnki.fhclxb.20200714.002 |
| |
| 作者姓名： | 李克诚 杨雷 高东岳 柳敏静 徐新生 武湛君 |
| |
| 作者单位： | 大连理工大学航空航天学院工业装备结构分析国家重点实验室,大连116024;大连理工大学工程力学系,大连116024;大连理工大学航空航天学院工业装备结构分析国家重点实验室,大连116024;中山大学航空航天学院,广州510275;大连理工大学工程力学系,大连116024 |
| |
| 基金项目： | 国家重点研发计划(2018YFA0702800);中央高校基本科研业务费专项资金(DUT19ZD101);国家自然科学基金(51805068)。 |
| |
| 摘 要： | 采用铝合金面板-硬质聚氨酯泡沫夹芯的复合式夹层构型,设计了一种用于低温火箭推进剂贮箱的共底结构,其具有轻量化、易于制造、承载/隔热一体化的特点.通过数值模拟手段,对该共底的隔热效果、结构稳定性及热力耦合问题进行分析.结果 表明,该共底满足低温液氢/液氧贮箱隔热要求,在0.342 MPa压差下不失稳,单箱打压低于0.5 ...
|
| 关 键 词： | 共底 硬质聚氨酯泡沫 低温贮箱 数值模拟 隔热 |
| 收稿时间： | 2020-05-06 |
Design and analysis of aluminum alloy-rigid polyurethane foam-cored common bulkhead for cryogenic tanks |
| |
| LI Kecheng,YANG Lei,GAO Dongyue,LIU Minjing,XU Xinsheng,WU Zhanjun. Design and analysis of aluminum alloy-rigid polyurethane foam-cored common bulkhead for cryogenic tanks[J]. Acta Materiae Compositae Sinica, 2021, 38(3): 911-919. DOI: 10.13801/j.cnki.fhclxb.20200714.002 |
| |
| Authors: | LI Kecheng YANG Lei GAO Dongyue LIU Minjing XU Xinsheng WU Zhanjun |
| |
| Affiliation: | 1.State Key Laboratory of Structural Analysis for Industrial Equipment, School of Aeronautics and Astronautics, Dalian University of Technology, Dalian 116024, China2.School of Aeronautics and Astronautics, Sun Yat-Sen University, Guangzhou 510275, China3.Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China |
| |
| Abstract: | By using a sandwich construction that consists of aluminum alloy panels-rigid polyurethane foam,a common bulkhead was devised for cryogenic launch vehicle tanks.The common bulkhead has the characteristics of lightweight,easy to manufacture,and integrated load bearing/thermal insulation.Based on numerical simulations,thermal insulation effect,structural stability and thermal-mechanical coupling behavior of the common bulkhead were analyzed.The results show that the common bulkhead not only satisfies the thermal insulation requirements of cryogenic tanks for liquid hydrogen and oxygen,but also keeps structural stability under a differential pressure of0.342 MPa and material safety with a pressure of 0.5 MPa.The design and analysis of this structure can provide technical support for the design of new cryogenic tanks with a common bulkhead. |
| |
| Keywords: | common bulkhead rigid polyurethane foam cryogenic tank numerical simulation thermal insulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载免费的PDF全文 |
|
