首页 | 本学科首页   官方微博 | 高级检索  
     

丰满混凝土重力坝渗流特性分析
引用本文:李守巨,刘迎曦,李政国,陈昌林. 丰满混凝土重力坝渗流特性分析[J]. 岩石力学与工程学报, 2001, 20(4): 477-480
作者姓名:李守巨  刘迎曦  李政国  陈昌林
作者单位:1. 大连理工大学工业装备结构分析国家重点实验室,大连,116024
2. 丰满发电厂,吉林,132106
基金项目:国家自然科学基金(10072014)和工业装备结构分析国家重点实验室开放基金(GZ9908)资助项目.
摘    要:根据丰满混凝土重力坝现场渗流观测资料数据,采用非线性最小二乘法识别坝体混凝土和坝基岩石的渗透系数。基于大坝渗透系数的识别结果,采用三维有限元法分析了大坝坝体和坝基的渗流场。渗流场自由面位置的确定采用压缩网格法,经迭代求得。大坝渗透系数识别采用迭代方法进行,其中搜索方向由Levenberg-Marquardt法确定。工程实验应用表明,所提出的三维非承压水参流场分析和大坝渗透系数识别方法是非常有效的。

关 键 词:混凝土重力坝 渗流 自由面 渗透系数
文章编号:1000-6915(2001)04-0477-04
收稿时间:1999-11-11
修稿时间:1999-11-11

ANALYSIS ON SEEPAGE CHARACTERISTICS OF CONCRETE GRAVITY DAM OF FENGMAN PROJECT
Li Shouju,Liu Yingxi,Li Zhengguo,Chen Changlin. ANALYSIS ON SEEPAGE CHARACTERISTICS OF CONCRETE GRAVITY DAM OF FENGMAN PROJECT[J]. Chinese Journal of Rock Mechanics and Engineering, 2001, 20(4): 477-480
Authors:Li Shouju  Liu Yingxi  Li Zhengguo  Chen Changlin
Abstract:Based upon in-situ measured data of seepage of Fengman concrete gravity dam and making use of the least square method, the permeable coefficients of the concrete dam and rock basement are identified. The seepage fields are studied with finite element method based on the identification results of aquifer parameters. The free surface positions are determined with compressing mesh method and iteration procedure. Aquifer parameter identification is made by means of iteration procedure. The search directions are determined with Levenberg-Marqua- rdt procedure. The practical application shows that the presented study of three dimensional seepage field with free surface and the identification procedure of aquifer parameters are available.
Keywords:concrete gravity dam   seepage   parameter identification   free surface   permeable coefficient
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《岩石力学与工程学报》浏览原始摘要信息
点击此处可从《岩石力学与工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号