| 镀银铜线的银层厚度与银质量分数换算 |
| |
| 引用本文： | 朱建芳,龚富华.镀银铜线的银层厚度与银质量分数换算[J].光纤与电缆及其应用技术,2009(3):5-11. |
| |
| 作者姓名： | 朱建芳 龚富华 |
| |
| 作者单位： | 中国电子科技集团公司第二十三研究所,上海,201900
|
| |
| 摘 要： | 从镀银铜线银层厚度的设计原理出发，推导了镀银铜线的银层厚度与银的质量分数之间的换算公式。并与ASTM13298、JB3135标准所列公式相比较，发现推导出的公式能更好地显示其本质，计算结果更为精确。列出的数据可供镀银铜线生产商方便地使用。
|
| 关 键 词： | 镀银铜线 镀层厚度 ASTM B298 JB 3135 |
Conversion Calculation between the Mass Percentage of Silver and the Silver Coating Thickness in Silver Plated Copper Wire |
| |
| ZHU Jian-fang,GONG Fu-hua.Conversion Calculation between the Mass Percentage of Silver and the Silver Coating Thickness in Silver Plated Copper Wire[J].Optical Fiber & Electric Cable and Their Applications,2009(3):5-11. |
| |
| Authors: | ZHU Jian-fang GONG Fu-hua |
| |
| Affiliation: | The 23rd Research Institute;CETC;Shanghai 201900;China |
| |
| Abstract: | Starting from the design principle of the silver coating thickness of silver plated copper wire,the conversion formulae between the mass percentage of silver and the silver coating thickness of silver plated copper wire are deduced.Comparing them with those in ASTM B298 and JB 3135,it is found that the deduced formulae recommended show the original nature better,and give more exact results.The data listed can be used by the manufactures directly and easily. |
| |
| Keywords: | ASTM'B298 JB'3135 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
