| 含Nb-Ti微合金汽车用钢高温变形组织及力学性能的研究 |
| |
| 引用本文： | 赵刚,叶传龙,余驰斌,宋平,苏毅,曾萍,陈良.含Nb-Ti微合金汽车用钢高温变形组织及力学性能的研究[J].钢铁研究,2003,31(3):46-50. |
| |
| 作者姓名： | 赵刚 叶传龙 余驰斌 宋平 苏毅 曾萍 陈良 |
| |
| 作者单位： | 1. 武汉科技大学
2. 武汉钢铁集团公司 |
| |
| 摘 要： | 研究了含Nb-Ti微合金汽车用钢高温变形时的软化行为和晶粒析出，对析出物的尺寸和分布进行了电镜分析。通过单道次和双道次压下模拟实验，分析了试验钢在不同温度和不同变形条件下的流动应力及显微组织。这些研究为制定最佳控轧工艺，得到细化奥氏体晶粒，获得良好的组织、性能打下了理论基础。
|
| 关 键 词： | 汽车用钢 高温变形 组织 力学性能 微合金钢 析出物 TEM 晶粒细化 |
STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Nb-Ti MICROALLOYED AUTOMOTIVE STEELS IN THE CONDITION OF HIGH TEMPERATURE DEFORMATION |
| |
| Zhao Gang,Ye Chuanlong,Yu Chibin.STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Nb-Ti MICROALLOYED AUTOMOTIVE STEELS IN THE CONDITION OF HIGH TEMPERATURE DEFORMATION[J].Research on Iron and Steel,2003,31(3):46-50. |
| |
| Authors: | Zhao Gang Ye Chuanlong Yu Chibin |
| |
| Affiliation: | Zhao Gang Ye Chuanlong Yu Chibin (Wuhan University of Science and Technology) Song Ping Su Yi Zeng Ping Chen Liang (Wuhan Iron and Steel Corp.) |
| |
| Abstract: | This paper studies the softening behavior and precipitat io n under high temperature deformation for Nb-Ti micro-alloyed automotive steels. The sizes and distribution of the precipitation particles were observed by TEM a nalysis. Single-pass and double-pass compression tests of thermal simulation exp eriment were carried out to investigate the flow stress and microstructure in di fferent temperatures and deforming conditions for the steels. These investigatio ns have laid a theoretical foundation to establish the optimal controlled rollin g parameters to produce fine grain steels with good microstructure and propertie s. |
| |
| Keywords: | Nb-Ti micro-alloyed steels microstructure refinement precipitation TEM analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
