首页 | 本学科首页   官方微博 | 高级检索  
     

导水断裂带发育高度的数值模拟
引用本文:武雄,汪小刚,段庆伟,于青春,杨健,孙燕冬.导水断裂带发育高度的数值模拟[J].煤炭学报,2008,33(6):609-612.
作者姓名:武雄  汪小刚  段庆伟  于青春  杨健  孙燕冬
作者单位:中国地质大学(北京)水资源与环境工程北京市重点实验室,北京,100083;中国水利水电科学研究院,北京,100044
基金项目:国家自然科学基金 , 水利部科技创新项目
摘    要:结合工程实例,采用ANSYS-2D,FLAC-2D和FLAC-3D程序对导水断裂带发育规律进行了大量计算和分析,认为:ANSYS-2D宜采用主应变指标来确定;FLAC-2D宜采用塑性区范围来确定;FLAC-3D宜采用应变增量(曲率)指标来确定.

关 键 词:导水断裂带  数值模拟  塑性区  主应变  应变增量
文章编号:0253-9993(2008)06-0609-04
修稿时间:2007年6月25日

Numerical modeling about developing high of water flowing fractured zone
WU Xiong,WANG Xiao-gang,DUAN Qing-wei,YU Qing-chun,YANG Jian,SUN Yan-dong.Numerical modeling about developing high of water flowing fractured zone[J].Journal of China Coal Society,2008,33(6):609-612.
Authors:WU Xiong  WANG Xiao-gang  DUAN Qing-wei  YU Qing-chun  YANG Jian  SUN Yan-dong
Abstract:Based on project examples,many calculations and analysis for the development law of water flowing fracture zone were done by using ANSYS-2D,FLAC-2D and FLAC-3D which were present popular programs.It is considered that FLAC-2D and FLAC-3D are comparatively proper calculation programs.It is suitable using the simulation results of main strain for analysis in ANSYS-2D and using the simulation results of plasticity zone in FLAC-2D and using the simulation results of strain increment in FLAC-3D.
Keywords:water flowing fracture zone  numerical simulation  plasticity zone  main strain  strain increment
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《煤炭学报》浏览原始摘要信息
点击此处可从《煤炭学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号