| 汽车轮毂轴承凸度有限元分析 |
| |
| 引用本文： | 孙立明,王大力,赵滨海,杨建虹,颜波,张天平. 汽车轮毂轴承凸度有限元分析[J]. 轴承, 2005, 0(2): 1-3,49 |
| |
| 作者姓名： | 孙立明 王大力 赵滨海 杨建虹 颜波 张天平 |
| |
| 作者单位： | 1. 洛阳轴承研究所,河南,洛阳,471039
2. 万向集团技术中心,浙江,萧山,311215 |
| |
| 摘 要： | 用ANSYS软件对桑塔纳轿车前轮毂轴承进行有限元分析 ,确定合理的凸度形式及滚子与滚道的最佳凸度匹配关系 ,给出了滚子、内圈滚道最佳凸度控制方程。结果表明 :凸度形式及滚子与滚道的凸度匹配关系对轴承的载荷分布和承载能力有显著影响 ,最佳凸度控制方程对改进轮毂轴承凸度设计具有重要的指导意义。
|
| 关 键 词： | 轮毂轴承 有限元 凸度 |
| 文章编号： | 1000-3762(2005)02-0001-04 |
Finite Element Analysis on Crowning for Automobile Hub Bearings |
| |
| SUN Li-ming ,WANG Da-li ,ZHAO Bin-hai ,YANG Jian-hong ,YAN Bo ,ZHANG Tian-ping. Finite Element Analysis on Crowning for Automobile Hub Bearings[J]. Bearing, 2005, 0(2): 1-3,49 |
| |
| Authors: | SUN Li-ming WANG Da-li ZHAO Bin-hai YANG Jian-hong YAN Bo ZHANG Tian-ping |
| |
| Affiliation: | SUN Li-ming 1,WANG Da-li 1,ZHAO Bin-hai 1,YANG Jian-hong 2,YAN Bo 2,ZHANG Tian-ping 2 |
| |
| Abstract: | The crowning of the front hub bearings of Santana car is analyzed by using ANSYS finite element software,and the proper crowning form and optimal crowning match relation between roller and raceway are determined.The optimal crowning control equations of roller and inner raceway is given.The results show that the crowning match relation between roller and raceway has an important influence for load distribution and capacity of the bearing,the optimal crowning control equations has mainly guiding meaning to improve crowning design of hub bearing. |
| |
| Keywords: | hub bearing finete element crowning |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
