| 铝合金挤压非正交网格有限体积法数值模拟 |
| |
| 引用本文： | 娄淑梅,张建中,袁建军.铝合金挤压非正交网格有限体积法数值模拟[J].热加工工艺,2010,39(7). |
| |
| 作者姓名： | 娄淑梅 张建中 袁建军 |
| |
| 作者单位： | 山东科技大学机电工程系,山东,泰安,271019 |
| |
| 基金项目： | 国家自然科学基金，山东科技大学"春蕾计划"项目 |
| |
| 摘 要： | 利用非正交网格,将铝合金挤压金属流动区域离散成不规则六面体有限体积控制单元,充分考虑网格非正交性对铝合金挤压金属流动控制方程离散过程的影响,研究了非正交网格下铝合金挤压有限体积法模拟关键技术。建立了基于非正交网格的铝合金挤压过程有限体积法数值模拟模型,并编制了相应的分析程序。对典型铝合金挤压过程进行了模拟,并与有限元分析软件Deform-3D模拟结果进行了分析比较。分析结果验证了本文铝合金挤压有限体积模拟模型的正确性。
|
| 关 键 词： | 铝合金挤压 有限体积 非正交网格 |
Numerical Simulation on Aluminum Alloy Extrusion using FVM Based on Non-orthogonal Grid |
| |
| LOU Shumei,ZHANG Jianzhong,YUAN Jianjun.Numerical Simulation on Aluminum Alloy Extrusion using FVM Based on Non-orthogonal Grid[J].Hot Working Technology,2010,39(7). |
| |
| Authors: | LOU Shumei ZHANG Jianzhong YUAN Jianjun |
| |
| Affiliation: | LOU Shumei,ZHANG Jianzhong,YUAN Jianjun(Department of Mechanical , Electrical Engineering,Sh,ong University of Science , Technology,Taian 271019,China) |
| |
| Abstract: | Using non-orthogonal grid,the complex metal flowing domain during aluminum alloy profile extrusion process was discreted into hexahedral FVM(Finite Volume Method) elements.The influence of the elements' non-orthogonality on the discrete process of governing equation for metal flowing during aluminum extrusion was fully considered.The key technologies of aluminum alloy extrusion simulation using FVM under non-orthogonal grids were studied.The model for numerical simulation on aluminum extrusion using non-ort... |
| |
| Keywords: | aluminum alloy extrusion FVM non-orthogonal grid |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
