| 铰孔质量的判别及其解决措施 |
| |
| 引用本文： | 刘尚荣.铰孔质量的判别及其解决措施[J].煤矿机械,2006,27(11):102-103. |
| |
| 作者姓名： | 刘尚荣 |
| |
| 作者单位： | 内蒙古科技大学,高等职业技术学院,内蒙古,包头,014010 |
| |
| 摘 要： | 介绍了铰孔过程中常出现的表面粗糙度和尺寸精度差以及孔口呈喇叭状所引起质量不合格的原因,并从铰削速度、铰削余量、铰削进给量、铰刀刀刃和润滑方面提出了相应的改进方法和对策,对提高和保证铰孔精度有一定的参考价值。
|
| 关 键 词： | 铰孔工艺 表面粗糙度 孔径 |
| 文章编号： | 1003-0794（2006）11-0102-02 |
| 收稿时间： | 2006-06-29 |
| 修稿时间： | 2006年6月29日 |
Estimation of Quality of Reaming and Solution |
| |
| LIU Shang-rong.Estimation of Quality of Reaming and Solution[J].Coal Mine Machinery,2006,27(11):102-103. |
| |
| Authors: | LIU Shang-rong |
| |
| Affiliation: | High Vocational College, University of Science and Techonlogy Inner Mongolia, Baotou 014010, China |
| |
| Abstract: | Based on the causes of quality defects occurring in the process of boring a hole, such as surface roughness, accuracy to size, and horn- type hole, proposes corresponding countermeasures and techniques at the aspects of cutting speed, reaming allowance, feed rate, reamer edge and lube, which are expected to guarantee and improve the precision of the reaming to some extent. |
| |
| Keywords: | techniques of boring hole surface roughness hole diameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
