首页 | 本学科首页   官方微博 | 高级检索  
     

石膏基复合胶凝材料的配比优化试验
引用本文:曹欣欣,桂敬能,梁子朝,林海祥,高培伟,耿飞.石膏基复合胶凝材料的配比优化试验[J].低温建筑技术,2019,41(8):14-17,25.
作者姓名:曹欣欣  桂敬能  梁子朝  林海祥  高培伟  耿飞
作者单位:南京鑫盛建筑工程质量检测有限公司,南京,211103;无锡金科嘉润房地产开发有限公司,江苏无锡214000;南京航空航天大学土木工程系,南京210016;南京航空航天大学土木工程系,南京,210016
基金项目:南京市级新型墙体材料专项补助资金项目
摘    要:以煅烧工业副产石膏为基材,混掺矿物掺合料和改性外加剂,通过设计正交试验研究石膏基复合材料中胶凝材料各组分掺比及水胶比对其力学性能和耐水性的影响,试验结果表明,固废胶结材与活性胶结材质量比是影响石膏基复合胶凝材料吸水率最主要因素,水胶比是影响其干密度和强度的最主要因素;当脱硫石膏、粉煤灰、矿粉、水泥、生石灰的配比为1:0.53:0.13:0.5:0.05时综合性能良好;建筑脱硫石膏水化形成的二水石膏晶体结构,与水泥、粉煤灰等水化形成的钙矾石和C-S-H凝胶等水硬性产物相互搭接成密实结构,显著提升了石膏基复合胶凝材料的强度和耐水性能。

关 键 词:工业副产石膏  胶凝材料  物理性能  配合比  正交试验

OPTIMIZED MIX PROPORTION OF GYPSUM-BASED COMPOSITE CEMENTITIOUS MATERIALS
CAO Xinxin,GUI Jingneng,LIANG Zizhao,LIN Haixiang,GAO Peiwei,GENG Fei.OPTIMIZED MIX PROPORTION OF GYPSUM-BASED COMPOSITE CEMENTITIOUS MATERIALS[J].Low Temperature Architecture Technology,2019,41(8):14-17,25.
Authors:CAO Xinxin  GUI Jingneng  LIANG Zizhao  LIN Haixiang  GAO Peiwei  GENG Fei
Affiliation:(Nanjing Xinsheng Construction Quality testing Co., Ltd., Nanjing 211103, China;Wuxi Jinke Jiarun Real Estate Development Co., Ltd., Jiangsu Wuxi 214000,China;Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)
Abstract:In this paper, the calcined industrial by-product gypsum was used as the base material to mix with mineral admixture and modified admixture. In the orthogonal testing scheme, the mixing ratio of each component of cementitious material, the ratio of water-to-binder ratio to the mechanical, and water resistance of gypsum-based composites were studied. The results show that the mass ratio of solid waste rubber to active cement is the most important factor affecting the water absorption of gypsum matrix composites. The water-to-binder ratio has the most important effect on the dry density and strength. Moreover, when the ratio of desulfurization gypsum powder, coal ash, mineral powder, cement and quicklime is 1:0.53:0.13:0.5:0.05, the comprehensive performance is better. Furthermore, the crystal structure of dihydrate gypsum formed by hydration of building desulfurization gypsum and the hydraulic products formed through the hydration of cement and fly ash such as ettringite and CSH gel are lapped to form a dense structure which significantly improves the strength and water resistance of the gypsum-based composite cementitious material.
Keywords:industrial by-product gypsum  cementitious materials  physical properties  mix proportion  orthogonal experimental design
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号