| 基于CAE的调温旋钮注塑模具设计 |
| |
| 引用本文： | 袁根华.基于CAE的调温旋钮注塑模具设计[J].现代机械,2014(5). |
| |
| 作者姓名： | 袁根华 |
| |
| 作者单位： | 广州工程技术职业学院机电工程系,广东 广州,510075 |
| |
| 摘 要： | 借助于CAE的Moldflow软件,通过浇口位置与填充分析,找到了调温旋钮最优的四腔排列的浇口位置,有利于工件成型的质量;在此基础上进行了模具的分型、浇注、冷却等系统的设计,最后设计出调温旋钮的模具结构。
|
| 关 键 词： | CAE 调温旋钮 填充分析 模具设计 |
An injection mold design of temperature-adjusting knob based on CAE |
| |
| YUAN Genhua.An injection mold design of temperature-adjusting knob based on CAE[J].Modern Machinery,2014(5). |
| |
| Authors: | YUAN Genhua |
| |
| Abstract: | By means of the CAE Moldflow software,and through the analysis of gate location and filling-process,the gate location of the four-cavity optimal layout for temperature-adjusting knob was found,which contributes to the quality of workpiece forming. On this basis,the mold parting,pouring,cooling and other systems were designed. As a result,the mold structure of the knob was worked out. |
| |
| Keywords: | CAE temperature-adjusting knob filling-process analysis mold design |
| 本文献已被 CNKI 等数据库收录！ |
|
