首页 | 本学科首页   官方微博 | 高级检索  
     

中低比转速离心泵叶轮多目标优化设计
引用本文:王幼民,唐铃凤,秦小建. 中低比转速离心泵叶轮多目标优化设计[J]. 机械传动, 2003, 27(2): 27-29
作者姓名:王幼民  唐铃凤  秦小建
作者单位:1. 安徽工程科技学院,安徽,芜湖,241000
2. 中国铝业股份有限公司中州分公司氧化铝厂,河南,焦作,454174
摘    要:中低比转速离心泵效率普遍不高,主要因素是泵的损失过大,在减小泵的损失时,容易使汽蚀余量增大,扬程曲线产生驼峰,为提高泵效率,减少汽蚀余量,消除扬程曲线驼峰,本文论述了以中低比转速泵的能量损失最小,汽蚀余量最小及消除扬程曲线驼峰为多目标函数,以叶轮主要参数为设计变量的泵叶轮优化设计方法,通过优化,获得了满足一定扬程和流量的最优参数组合。

关 键 词:中低比转速 离心泵 叶轮 多目标优化设计
文章编号:1004-2539(2003)02-0027-03
修稿时间:2002-07-23

Multi - object Optimal Design of Low Specific Speed Pump Impeller
Wang Youmin,et al.. Multi - object Optimal Design of Low Specific Speed Pump Impeller[J]. Journal of Mechanical Transmission, 2003, 27(2): 27-29
Authors:Wang Youmin  et al.
Abstract:Because of its loss, the efficiency of middle and low specific speed pump is low. When the loss of pump was decreased. The NPSHr of pump was increased and the pump of curves was produced. Based on the main geometry diameters of an impeller, the article discuses an optimal design method for the low specific speed pump impeller to minimizes energy losses and NPSHr. An optimal parameter group that satisfied with the capacity and head was obtained through minimization.
Keywords:Centrifugal pump Multi-object optimal design Impeller
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号