| 加工圆周等分孔的通用夹具 |
| |
| 引用本文： | 倪玲.加工圆周等分孔的通用夹具[J].流体传动与控制,2005(6):38-39. |
| |
| 作者姓名： | 倪玲 |
| |
| 作者单位： | 力源液压股份有限公司,贵州,贵阳,550018 |
| |
| 摘 要： | 在圆周等分孔加工中，孔的位置精度要求难以保证，废品率高，加工效率低。此文介绍一种专用夹具的设计，以满足孔加工的位置精度要求。该夹具制造较简单，使用、返修方便。
|
| 关 键 词： | 孔 等分 夹具 位置精度 |
| 文章编号： | 1672-8904(2005)05-0038-002 |
| 收稿时间： | 2005-08-05 |
| 修稿时间： | 2005年8月5日 |
A Kind of Conventional Fixture Used in Machining Equated Holes of Cylinder Block |
| |
| NI Ling.A Kind of Conventional Fixture Used in Machining Equated Holes of Cylinder Block[J].Fluid Power Transmission & Control,2005(6):38-39. |
| |
| Authors: | NI Ling |
| |
| Abstract: | Location tolerance holes is hard to meet the need,and cause the high rate of waster and the low effcercy of machining in the process of machining about equating holes on circle.With simple process of machining,convenience in using and repairing,a professional tool is introduced.The tool meets the need of location tolerance of holes in part machining. |
| |
| Keywords: | equated hole fixture location tolerance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
