首页 | 本学科首页   官方微博 | 高级检索  
     

不等宽T型方管节点静力工作性能的研究
引用本文:武振宇,谭慧光,张耀春. 不等宽T型方管节点静力工作性能的研究[J]. 哈尔滨建筑大学学报, 2002, 35(6): 14-17
作者姓名:武振宇  谭慧光  张耀春
作者单位:1. 哈尔滨工业大学,土木工程学院,黑龙江,哈尔滨,150090
2. 哈尔滨工业大学,基建处,黑龙江,哈尔滨,150001
基金项目:国家自然科学基金(50108006),黑龙江省博士后科研启动基金
摘    要:直接焊接方管节点是复杂的三维空间薄壁结构,对其理论分析必须考虑几何非线性和材料非线性的影响。采用能处理几何非线性和材料 非线性影响的有限元方法分析不等宽T型方管节点的受力全过程,对材料应变硬化、大挠度效应及弘杆所受荷载对节点承载力的影响进行了研究。研究结果表明,材料应变硬化对节点影响不大,大挠度效应显著提高了节点的承载力,弘杆所受轴压荷载降低了节点承载力。

关 键 词:不等宽T型方管节点 应变硬化 大挠度效应 弦杆荷载 静力性能 有限元
文章编号:1006-6780(2002)06-0014-04
修稿时间:2001-11-15

Static behavior of stepped T-type RHS joints
WU Zhen-yu,TAN Hui-guang,ZHANG Yao-chun. Static behavior of stepped T-type RHS joints[J]. Journal of Harbin University of Civil Engineering and Architecture, 2002, 35(6): 14-17
Authors:WU Zhen-yu  TAN Hui-guang  ZHANG Yao-chun
Abstract:The directly welded RHS joints are complicated 3-D thin walled structures. In order to get its behavior by theoretical analysis, the material and geometrically nonlinear problems must be considered. The complete load-deflection response of stepped T-type RHS joints under loading is traced by using finite element method considering material and geometrically nonlinear effect. The influence of strain hardening of steel material, large deflection and load on the chord on the strength of RHS joints is studied. The research results show that the strain hardening has little effect on the behavior of RHS joints. The strength of RHS joints is raised due to large deflection effect of the joint, and decreased by load on the chord.
Keywords:stepped T-type RHS joints  strain hardening  large deflection effect  load on the chord  static be- havior  finite element
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号