首页 | 本学科首页   官方微博 | 高级检索  
     

化学气相渗C/SiC材料结构与性能的研究
引用本文:刘文川,纪锐.化学气相渗C/SiC材料结构与性能的研究[J].硅酸盐学报,1995,23(3):336-341.
作者姓名:刘文川  纪锐
作者单位:中国科学院金属研究所材料疲劳与断裂国家重点实验室
基金项目:国家863计划资助项目
摘    要:采用碳布层叠然后用化学气相渗方法制备了C/SiC复合材料,这种材料纤维与基体间的界面是决策材料力学行为的重要因素,带有热解碳作为界面层的C/SiC材料,在断裂进表现出大范围的脱粘,纤维与周围的基体不同发生断裂,有大量的纤维拨出,断口类似毛刷,无界央层材料表现为脆性平面断口,裂纹直接通过纤维和基体向前扩展,没有发生脱粘。

关 键 词:碳化硅  碳纤维  复合材料  化学气相渗  界面脱粘

THE MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF C/SiC COMPOSITES PREPARED BY CVI
Liu Wenchuan, Ji Rui,Wei Yongliang ,Deng Jingyi.THE MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF C/SiC COMPOSITES PREPARED BY CVI[J].Journal of The Chinese Ceramic Society,1995,23(3):336-341.
Authors:Liu Wenchuan  Ji Rui  Wei Yongliang  Deng Jingyi
Abstract:C/SiC composites have been fabricated by using layered fabrics of carbon fibers and then densi-fied with SiC matrix deposited by CVI process. In such composites, the nature of the fiber-matrix interface isobviously a key factor in determing mechenical behavior.C/SiC composites with pyrolytic carbon interfaciallayers exhibit extensive debonding of the interface,resulting in the fracture of the fiber and the surroundingmatrix separately in different locations. This is accompanied by substantial apparent pullout of the fibers fromthe matrix,as suggested the brushlike fracture surface. In the absence of a fiber coating,composite with poortoughness will be fractured by the propagation of a single,near-planar cracks that pass through the matrixand fiber without interfacial debonding.
Keywords:interface  debonding  pullout  carbon  silicon carbide  composites
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号