| 滚筒支架成形工艺与模具设计 |
| |
| 引用本文： | 张宝霞.滚筒支架成形工艺与模具设计[J].模具工业,2010,36(11):23-26. |
| |
| 作者姓名： | 张宝霞 |
| |
| 作者单位： | 滁州职业技术学院机电系,安徽,滁州,239000 |
| |
| 基金项目： | 安徽省职成教学会2010年度教育科研规划项目 |
| |
| 摘 要： | 分析滚筒支架成形工艺与模具设计,采用连续落料方式,大大提高了材料利用率和生产效率,落料、冲孔、折弯三副模具配套使用完成滚筒支架成形。实践证明:模具结构简单,操作方便,安全可靠,对同类零件的模具设计具有一定的参考价值。
|
| 关 键 词： | 滚筒支架 落料 冲孔 折弯 模具设计 |
The forming process and design of die for roller bracket |
| |
| ZHANG Bao-xia.The forming process and design of die for roller bracket[J].Die & Mould Industry,2010,36(11):23-26. |
| |
| Authors: | ZHANG Bao-xia |
| |
| Affiliation: | ZHANG Bao-xia(Chuzhou Vocational Technology College,Chuzhou,Anhui 239000,China) |
| |
| Abstract: | The forming process and design of a die for a roller bracket were investigated.The application of continuous blanking method greatly improves the material utilization and production efficiency.The shaping of the roller bracket was implemented by synthetically using three dies for blanking,piercing and flexing and bending. |
| |
| Keywords: | roller bracket blanking piercing flexing and bending die design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
