| (Ni-P)-SiC复合电刷镀 |
| |
| 引用本文： | 罗建东,阮锋,刘慧平.(Ni-P)-SiC复合电刷镀[J].电镀与精饰,2007,29(1):19-21. |
| |
| 作者姓名： | 罗建东 阮锋 刘慧平 |
| |
| 作者单位： | 华南理工大学,广东,广州,510640 |
| |
| 摘 要： | 在机械零件的修理方面,目前电刷镀应用最多的是N i镀层和N i-W-Co镀层,但是这些镀层应用于拉深模具上效果还不理想。通过正交试验获得了一种(N i-P)-S iC电刷镀配方,其镀层经适当的热处理后,硬度、耐磨性、结合力均优于N i-W-Co镀层,经生产验证,该种镀层应用于拉深模具是可行的。
|
| 关 键 词： | 电刷镀 (Ni-P)-SiC 复合镀 拉深模具 |
| 文章编号： | 1001-3849（2007）01-0019-03 |
| 收稿时间： | 2006-05-15 |
| 修稿时间： | 2006年5月15日 |
(Ni-P)-SiC Composite Brush Plating |
| |
| LUO Jian-dong,RUAN Feng,LIU Hui-ping.(Ni-P)-SiC Composite Brush Plating[J].Plating & Finishing,2007,29(1):19-21. |
| |
| Authors: | LUO Jian-dong RUAN Feng LIU Hui-ping |
| |
| Affiliation: | South China Unviersity of Technology, Guangzhou 510640, China |
| |
| Abstract: | In the aspect of the mechanical part reparing,two brush plating layers of Ni and Ni-W-Co are widely applied at present.But,they can't work very good if they are applied to the deep drawing die.By experiment optimizing,a composition for brush plating(Ni-P)-SiC is gained.After a appropriate heat treatment,the hardness,abrasion-resistance and adhesion of the coating are better than that of Ni-W-Co.By practical application,the layer was to proved to be usable of the deep drawing die. |
| |
| Keywords: | brush plating (Ni-P)-SiC complex plating deep drawing die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
