设计凸轮机构应注意的问题 |
| |
引用本文: | 保承军,岳桂杰.设计凸轮机构应注意的问题[J].装备制造技术,2007(12):50-50,54. |
| |
作者姓名: | 保承军 岳桂杰 |
| |
作者单位: | 兰州城市学院,甘肃兰州,30070 |
| |
摘 要: | 针对凸轮机构设计过程中应注意的主要问题进行了分析,介绍了滚子半径的选择、压力角的校核以及基圆半径对凸轮机构的影响三个方面的主要内容,为合理设计凸轮机构起到一定的参考作用。
|
关 键 词: | 凸轮机构 滚子半径 压力角 基圆半径 |
文章编号: | 1672-545X(2007)12-0050-01 |
收稿时间: | 2007-10-21 |
修稿时间: | 2007年10月21 |
Problems Should Be Paid Attention to in the Cam Mechanism Design |
| |
Authors: | BAO Cheng-jun YUE Gui-jie |
| |
Abstract: | The main problems in the process of cam mechanism design should be paid attention to were analyzed. How to choice the miler radius and check the pressure angle, and the affected of the base circle radius to the cam mechanism were introduced. It can provide a reference for cam mechanism reasonable design. |
| |
Keywords: | Cam mechanism Roller radius Pressure angle Base circle radius |
本文献已被 维普 万方数据 等数据库收录! |