一种自动检测设置死区时间的电路设计

本文推出一种自动设置死区时间的控制器。该控制器采用栅源电压差与阈值电压相比较的工作原理,得到的输出信号分别控制彼此栅极电平,确保上下桥臂不同时导通。为加速比较信号的反应,比较器电路中运用正反馈特性。最后,在感性负载下,给出阈值电压为1.2V时,死区时间的仿真和实验结果,仿真采用华润上华0.5μm CMOS工艺实现。电路设计简单,驱动电路也不要额外设置死区时间。

A kind of automatic detection and setting dead time circuit designing

This paper introduced a kind of controller circuit which can automaticly set dead time.The controller works in this way that compares the voltage difference between gate and source of MOS tube to threshold voltage.The results of comparing each controls another gate in order to guarantee that the half bridge can not be turned on at the same time.The circuit with positive feedback is used here as to speed up the comparison of the response signal.At last,in the perceptual load,here gives the simulation and experiment results of dead time under the threshold voltage of 1.2V.The simulation results was realized by CSMC 0.5μm CMOS technology.the controller circuit is designed simply,and extra dead time need not to be setted up in the driving circuit.